Fault codes, referred to as error codes or diagnostic codes, serve as a built-in feature that enables your Avanti dryer to automatically detect and report internal issues. Here, we’ve provided a comprehensive list of Avanti dryer fault codes, along with their explanations, to assist you in effectively pinpointing the root cause of any problems your appliance may encounter.
You can conveniently access the error code display on the front panel of your Avanti dryer. Depending on the specific model, this code can be viewed directly on the digital display (e.g., “Err 01”) or by counting the number of LED flashes. In certain models, for instance, four flashes correspond to the error code “Err4.”
Error Code: E00
Solution: Contact the nearest authorised service agent.
Error Code: E03
Solution: Empty the water tank, if problem does not solved, contact the nearest authorised service agent.
Error Code: E04
Solution: Contact the nearest authorised service agent.
Error Code: E05
Solution: Contact the nearest authorised service agent.
Error Code: E06
Solution: Contact the nearest authorised service agent.
Error Code: E08
Solution: There may be voltage fluctuation in mains.Wait until voltage is appropriate for working range.
Problem: The drying process takes a long time
Reason: The surface of the lint filter might be clogged.
Solution: Wash the filter with lukewarm water.
Problem: The drying process takes a long time
Reason: The condenser might be clogged.
Solution: Clean the condenser.
Problem: The drying process takes a long time
Reason: The ventilation grills in front of the machine might be closed.
Solution: Open the doors/windows to prevent the room temperature from rising too much.
Problem: The drying process takes a long time
Reason: There might be a layer of limescale on the humidity sensor.
Solution: Clean the humidity sensor.
Problem: The drying process takes a long time
Reason: The dryer might be overloaded with laundry.
Solution: Do not overload the dryer.
Problem: The drying process takes a long time
Reason: The laundry might be insufficiently spun.
Solution: Select a higher spin speed on your washing machine.
Problem: Laundry comes out damp at the end of the drying process
Reason: The program used might not be suitable for the type of laundry.
Solution: Check the care labels on the laundry items, select a suitable program for the type of laundry and additionally, use the time programs.
Problem: Laundry comes out damp at the end of the drying process
Reason: The surface of the lint filter might be clogged.
Solution: Wash the filter with lukewarm water.
Problem: Laundry comes out damp at the end of the drying process
Reason: The condenser might be clogged.
Solution: Clean the condenser.
Problem: Laundry comes out damp at the end of the drying process
Reason: The dryer might be overloaded with laundry.
Solution: Do not overload the dryer.
Problem: Laundry comes out damp at the end of the drying process
Reason: The laundry might be insufficiently spun.
Solution: Select a higher spin speed on your washing machine.
Problem: The dryer cannot be opened or the program cannot be started. The dryer does not get activated when adjusted
Reason: The dryer might not be plugged in.
Solution: Make sure that the plug is fitted in the socket.
Problem: The dryer cannot be opened or the program cannot be started. The dryer does not get activated when adjusted
Reason: The loading door might be open.
Solution: Make sure that the loading door is properly closed.
Problem: The dryer cannot be opened or the program cannot be started. The dryer does not get activated when adjusted
Reason: You might not have set a program or pressed the Start/Pause key.
Solution: Make sure that the program has been set and the dryer is not in the Standby (Pause) mode.
Problem: The dryer cannot be opened or the program cannot be started. The dryer does not get activated when adjusted
Reason: Child lock might be active.
Solution: Deactivate the child lock.
Problem: The program has been interrupted for no reason
Reason: The loading door might not be closed properly.
Solution: Make sure that the loading door is properly closed.
Problem: The program has been interrupted for no reason
Reason: There might have been a power failure.
Solution: Press the Start/Pause key to start the program.
Problem: The program has been interrupted for no reason
Reason: The water tank might be full.
Solution: Empty the water tank.
Problem: Clothes have shrunk, felted or deteriorated
Reason: The program used might not be suitable for the type of laundry.
Solution: Check the care labels on the laundry items, select a suitable program for the type of laundry.
Problem: Water leaking from the loading door
Reason: There might be lint accumulated on the inner surfaces of the loading door and on the surfaces of the gasket of the loading door.
Solution: Clean the inner surfaces of the loading door and the surfaces of the gasket of the loading door.
Problem: The loading door opens on its own
Reason: The loading door might not be closed properly.
Solution: Push the loading door until you hear the closing sound.
Problem: The water tank warning symbol is on/flashing
Reason: The water tank might be full.
Solution: Empty the water tank.
Problem: The water tank warning symbol is on/flashing
Reason: The water discharge hose might be bent.
Solution: If the product is connected directly to the water outlet, check the water discharge hose.
Problem: The condenser cleaning warning symbol is on
Reason: The condenser might be unclean.
Solution: Clean the condenser.
Problem: The filter cleaning warning symbol is on
Reason: The lint filter might be unclean.
Solution: Clean the filter.
Problem: The filter cleaning warning symbol is on
Reason: The filter seat might be clogged by lint.
Solution: Clean the filter seat.
Problem: The filter cleaning warning symbol is on
Reason: There might be a layer that causes obstruction on the surface of the lint filter.
Solution: Wash the filter with lukewarm water.
Problem: The program can not be started and the filter warning led is blinking
Reason: The filter seat might be clogged by lint.
Solution: Clean the filter seat.
Problem: The program can not be started and the filter warning led is blinking
Reason: There might be a layer that causes obstruction on the surface of the lint filter.
Solution: Wash the filter with lukewarm water.
Problem: The program can not be started and the filter warning led is blinking
Reason: The condenser may not be placed.
Solution: Replace the condenser.
Problem: The program can not be started and both condenser and filter warning leds are blinking
Reason: The condenser and filter may not be placed.
Solution: Replace the filter and condenser.
Problem: The program can not be started and both condenser and filter warning leds are blinking
Reason: The filter and condenser warning leds are blinking even though the filter and condenser are placed.
Solution: Call technical service.
