Fault codes, also called error codes or fault codes, allow your device to automatically report an internal malfunction. Below you will find the list of fault codes for your Beko washing machine and their meaning: this will give you an indication to best diagnose the origin of the malfunction of your appliance.
The error code can be read directly on the front panel of your Beko washing machine. Depending on the model, you can read this code on a display (for example, “Err 01”) or by observing the number of LED flashes (for example: 4 LED flashes = “Err 04”).
Refer to the user manual for your Beko device to find out the exact meaning of the fault code displayed or the lights flashing. The number of flashes often corresponds to the error code number, but there are specificities linked to each model and brand.
ERROR CODE E01 – DRAIN
This error code corresponds to a problem with the washing machine draining.
- Start by emptying the water from the machine from the trapdoor on the lower part of the appliance and clean the drain pump filter .
- Check that the drain pump is not clogged and that it is working electrically.
- Depending on the problem, replace the filter or drain pump.
ERROR CODE E02 – WATER SUPPLY
This error code concerns the water supply to the device.
- Check that the taps supplying the water are turned on and that the pipes are not blocked or kinked.
- Then check the solenoid valve and the pressure switch, which must be replaced if one of them is defective.
ERROR CODE E03 – HEATING
This fault code indicates that the water heating system is not working properly.
- Check the connections and the condition of the resistance
- Replace the electronic card if the resistance is not the cause.
ERROR CODE E04 – WATER SUPPLY
This error code concerns the water supply to the device.
- Check that the taps supplying the water are turned on and that the pipes are not blocked or kinked.
- Then check the solenoid valve and the pressure switch, which must be replaced if one of them is defective.
ERROR CODE E05 – DRAIN
This fault code indicates that the device is not draining correctly.
- Start by emptying the water from the machine from the trapdoor on the lower part of the device and cleaning the filter.
- Check that the drain pump is not clogged and that it is working electrically.
- Depending on the problem, replace the filter or drain pump.
ERROR CODE E06 – DRUM ROTATION
This fault code is displayed when the drum is blocked and does not rotate while the device is running.
- First check that nothing is blocking the rotation of the drum.
- Then check the motor brushes and replace them if they are worn.
- Otherwise, check the motor and the capacitor, which must be discharged by bringing the two legs into contact with insulated pliers.
- Finally, if the error persists, replace the electronic card.
ERROR CODE E07 – PRESSURE SWITCH
This error code indicates a pressure switch failure. The pressure switch controls the water level in your washing machine. If it is defective, it will assume that there is still water in the tank and will block any water flow.
- Check the compression chamber, hoses and pressure switch. To control the pressure switch, you can blow into it and hear a “click” (you don’t have to blow very hard). There are also pressure switches linked to an electronic card: they cannot be controlled.
- Replace the pressure switch or electronic board to resolve the error.
ERROR CODE E08 – WATER SUPPLY
This error code concerns the water supply to the device.
- Check that the taps supplying the water are turned on and that the pipes are not blocked or kinked.
- Then check the solenoid valve and the pressure switch, which must be replaced if one of them is defective.
ERROR CODE E09 / E10 – DOOR CLOSING
This error code may indicate that the door is simply not properly closed. If the door remains open, the program cannot start.
- Check that the door is properly closed.
- If the error persists, check the door lock system.
- Finally, check that the drum turns: if it does not turn, the belt or pulley may be damaged.
ERROR CODE E11 – DRUM ROTATION
This fault code is displayed when the drum is blocked and does not rotate while the device is running.
First check that nothing is blocking the rotation of the drum. Then check the motor brushes and replace them if they are worn. Otherwise, check the motor and the capacitor, which must be discharged by bringing the two legs into contact with insulated pliers. Finally, if the error persists, replace the electronic card.
ERROR CODE E12 – WATER SUPPLY
This error code concerns the water supply to the device.
- Check that the taps supplying the water are turned on and that the pipes are not blocked or kinked.
- Then check the solenoid valve and the pressure switch, which must be replaced if one of them is defective.
ERROR CODE E13 – DRUM ROTATION
This fault code is displayed when the drum is blocked and does not rotate while the device is running.
- First check that nothing is blocking the rotation of the drum .
- Then check the motor brushes and replace them if they are worn.
- Otherwise, check the motor and the capacitor , which must be discharged by bringing the two legs into contact with insulated pliers.
- Finally, if the error persists, replace the electronic card .
ERROR CODE E15 – WATER SUPPLY
This error code concerns the water supply to the device.
- Check that the taps supplying the water are turned on and that the pipes are not blocked or kinked.
- Then check the solenoid valve and the pressure switch, which must be replaced if one of them is defective.
ERROR CODE E17 – FOAM DETECTION
This fault code corresponds to a detection of too much foam.
Reduce the detergent dosage, especially when using water with low hardness or when washing lightly soiled laundry.
ERROR CODE E18 – CHARGING
This fault code corresponds to an unbalance detection: an unbalance occurs when there is an imbalance in the drum, because there is too much laundry or because the laundry has gotten into a ball.
Reduce the laundry load or put laundry items of the same weight.
ERROR CODE E28 – DOOR SECURITY
This fault code indicates a fault in the door security, which may be blocked or can no longer close.
Replace the door lock system to resolve the error.
ERROR CODE E29 – ELECTRICAL INSTALLATION
This fault code indicates a problem with the electrical installation.
Apart from checking that the appliance and the socket are correctly connected, this problem can only be resolved by checking the electrical installation with the help of a professional.
E31: Water Level Sensor Issue
The water level sensor in the washing machine is malfunctioning, affecting water intake and control during cycles.
E32: Overflow Protection
This error indicates that the washing machine’s overflow protection system has been triggered due to excessive water.
E33: Door Seal Sensor Error
The sensor responsible for detecting the door seal condition is malfunctioning, potentially affecting the seal’s effectiveness.
E34: Drum Bearing Fault
There is a problem with the drum’s bearing system, leading to excessive noise during operation and potential drum wobbling.
E35: Pressure Switch Error
The pressure switch, which controls water level, is malfunctioning, causing issues with water intake and control.
E36: Timer Delay Error
This error code indicates a delay or timing issue with the washing machine’s cycle timer.
E37: Motor Overload
The washing machine’s motor has experienced an overload condition, potentially due to an excessively heavy load.
E38: Child Lock Activation
This is not an error code but a notification that the child lock feature has been activated, limiting access to the controls.
E39: Water Pump Malfunction
There is an issue with the water pump, affecting water drainage during the wash cycle.
E40: Drum Unbalance Retry
This is not an error code but a notification that the washing machine is attempting to rebalance an unbalanced load and will retry the cycle.
E41: Motor Brush Malfunction
This error suggests a problem with the motor’s brushes, which may require replacement to restore proper operation.
E42: Motor Speed Sensor Error
The sensor responsible for monitoring the motor’s speed is malfunctioning, affecting cycle performance.
E43: Water Heater Fault
There is an issue with the washing machine’s water heater, affecting the ability to heat water during certain cycles.
E44: Door Lock Mechanism Issue
The door lock mechanism is malfunctioning, preventing the washing machine from locking or starting.
E45: Water Pressure Sensor Fault
The pressure sensor responsible for monitoring water pressure is malfunctioning, affecting water intake and control.
E46: Drum Rotation Sensor Error
The sensor responsible for monitoring the drum’s rotation is malfunctioning, affecting wash and spin cycles.
E47: Dryer Heating Element Error
If your washing machine has a built-in dryer, this error indicates a problem with the heating element, affecting drying performance.
E48: Program Selector Sensor Issue
The sensor associated with the program selector on the control panel is malfunctioning, affecting cycle selection.
E49: Spin Cycle Sensor Error
The sensor responsible for monitoring the spin cycle is malfunctioning, affecting spin speed control.
E50: Drum Temperature Sensor Fault
The sensor for monitoring the drum’s temperature is malfunctioning, affecting cycle temperature control.
E51: Drain Hose Blockage
The washing machine has detected a blockage in the drain hose, preventing proper water drainage.
E52: Inlet Valve Fault
This error code indicates a problem with the inlet valve, affecting water supply during the wash cycle.
E53: Overheating Protection
The washing machine has detected overheating and has activated a safety feature to protect the appliance.
E54: Control Panel Malfunction
This error points to a malfunction in the washing machine’s control panel or user interface, affecting settings and display.
E55: Drum Bearing Sensor Error
The sensor responsible for monitoring the drum’s bearing system is malfunctioning, potentially causing noise during operation.
E56: Water Temperature Calibration Error
The temperature calibration settings in the washing machine require adjustment, affecting cycle temperature control.
E57: Water Pump Sensor Issue
The sensor associated with the water pump is malfunctioning, potentially affecting water drainage.
E58: Detergent Drawer Sensor Fault
The sensor responsible for detecting the status of the detergent drawer is malfunctioning, affecting detergent dispensing.
E59: Door Lock Sensor Issue
The sensor responsible for detecting the door lock status is malfunctioning, potentially preventing the washing machine from starting.
E60: Communication Loss with Drum Motor
This error code indicates a loss of communication between the control board and the drum motor, affecting drum rotation.
E61: Cycle Timer Error
There is an issue with the cycle timer, affecting the timing and sequence of wash cycles.
E62: Drum Speed Sensor Fault
The sensor responsible for monitoring the drum’s speed is malfunctioning, affecting cycle performance.
E63: Water Heater Overload
The water heater has experienced an overload condition, potentially due to excessive use or a faulty heating element.
E64: Door Lock Mechanism Issue
The door lock mechanism is malfunctioning, preventing the washing machine from locking or starting.
E65: Water Pressure Sensor Fault
The pressure sensor responsible for monitoring water pressure is malfunctioning, affecting water intake and control.
E66: Drum Rotation Sensor Error
The sensor responsible for monitoring the drum’s rotation is malfunctioning, affecting wash and spin cycles.
E67: Dryer Heating Element Error
If your washing machine has a built-in dryer, this error indicates a problem with the heating element, affecting drying performance.
E68: Program Selector Sensor Issue
The sensor associated with the program selector on the control panel is malfunctioning, affecting cycle selection.
E69: Spin Cycle Sensor Error
The sensor responsible for monitoring the spin cycle is malfunctioning, affecting spin speed control.
E70: Drum Temperature Sensor Fault
The sensor for monitoring the drum’s temperature is malfunctioning, affecting cycle temperature control.
E71: Drain Hose Blockage
The washing machine has detected a blockage in the drain hose, preventing proper water drainage.
E72: Inlet Valve Fault
This error code indicates a problem with the inlet valve, affecting water supply during the wash cycle.
E73: Overheating Protection
The washing machine has detected overheating and has activated a safety feature to protect the appliance.
E74: Control Panel Malfunction
This error points to a malfunction in the washing machine’s control panel or user interface, affecting settings and display.
E75: Drum Bearing Sensor Error
The sensor responsible for monitoring the drum’s bearing system is malfunctioning, potentially causing noise during operation.
E76: Water Temperature Calibration Error
The temperature calibration settings in the washing machine require adjustment, affecting cycle temperature control.
E77: Water Pump Sensor Issue
The sensor associated with the water pump is malfunctioning, potentially affecting water drainage.
E78: Detergent Drawer Sensor Fault
The sensor responsible for detecting the status of the detergent drawer is malfunctioning, affecting detergent dispensing.
E79: Door Lock Sensor Issue
The sensor responsible for detecting the door lock status is malfunctioning, potentially preventing the washing machine from starting.
E80: Communication Loss with Drum Motor
This error code indicates a loss of communication between the control board and the drum motor, affecting drum rotation.
