Blomberg washing machines are essential for laundry routines, but service issues have occasionally emerged. Users have reported delays in obtaining prompt repairs for issues like drum malfunctions, drainage problems, or cycle malfunctions. Timely access to service is critical, given the importance of laundry in daily life. Some users have also faced challenges in scheduling convenient service appointments, leading to extended periods without a functioning washing machine.
W01: Door Lock Fault
The washing machine cannot securely lock its door. Ensure the door is properly closed, and there are no obstructions in the latch.
W02: Water Inlet Problem
The machine is unable to fill with water at the expected rate. Check the water supply hoses for kinks or blockages, and ensure the tap is fully open.
W03: Drainage Issue
The machine cannot drain the water efficiently. Inspect the drain hose for obstructions and check the pump filter for blockages.
W04: Oversudsing Detected
Too many suds have been detected, which could be due to using too much detergent. Use the recommended amount of detergent for your load size.
W05: Imbalance Detected
The laundry load is imbalanced, causing the machine to vibrate excessively. Redistribute the clothing and try again.
W06: Motor Overheating
The motor’s temperature is beyond the safe range. Allow the machine to rest before attempting another cycle.
W07: Spin Cycle Error
The machine is unable to spin correctly. This could be due to an imbalanced load or a malfunctioning motor.
W08: Water Temperature Sensor Fault
The sensor that monitors water temperature is malfunctioning. Check the wiring or consult a technician.
W09: Control Panel Malfunction
The machine’s control panel is unresponsive or behaving unexpectedly. Consider resetting the washer or checking for any visible damage to the panel.
W10: Water Level Too Low
The washing machine has detected that the water level is below the required minimum. Ensure water inlets are open and working correctly.
W11: Water Level Too High
The machine is overfilling, possibly due to a faulty inlet valve or malfunctioning sensor. Stop the cycle and consult a technician.
W12: Detergent Dispenser Error
There’s an issue with the detergent dispenser; it may be clogged or malfunctioning. Clean the dispenser and ensure it’s correctly seated.
W13: Drum Rotation Issue
The drum is unable to rotate freely, which might be due to a load imbalance or a mechanical fault. Check for obstructions or foreign objects in the drum.
W14: Heating Element Fault
The machine’s heating element is not working correctly, causing issues with temperature regulation. This will need inspection and possibly replacement.
W15: Cycle Duration Error
The selected wash cycle is taking much longer than expected. This could be due to several factors, including water temperature or motor issues.
W16: Internal Leak Detected
The washing machine has detected a potential internal leak. Stop the machine and check for any visible signs of water leakage.
W17: Rinse Cycle Inefficiency
The rinse cycle is not completing properly, possibly due to low water pressure or a sensor malfunction. Check water inlets and filters for any blockages.
W18: Excessive Vibration Detected
The machine is vibrating more than usual. Ensure the machine is on a flat surface and that the laundry load is balanced.
W19: Software Update Failure
If your machine is equipped with software capabilities, there was an issue updating it. Ensure a stable network connection or try updating later.
W20: Delay Start Malfunction
The delay start feature isn’t functioning correctly. Try resetting the machine or refer to the user manual for specific reset procedures.
W21: Inadequate Drain Flow
The draining speed is slower than expected. Check for blockages in the drain hose or pump filter and ensure they’re clear.
W22: Lid Lock Error
If your machine is top-loading, there’s an issue with the lid locking mechanism. Ensure the lid is correctly placed and free of obstructions.
W23: Cycle Memory Fault
The machine is unable to remember previous cycle settings. This might indicate a control board or software issue.
W24: Cold Wash Inefficiency
The cold wash cycle isn’t achieving the desired results. Ensure the cold water inlet is functioning properly and that appropriate detergents are used.
W25: Child Lock Malfunction
The child lock feature isn’t engaging or disengaging correctly. Refer to the user manual for proper activation procedures or consider a reset.
W26: Water Hardness Sensor Error
If equipped, the sensor determining water hardness is malfunctioning. This may affect detergent dispensing. Check if the sensor is clean and not obstructed.
W27: Anti-Flood System Activated
The washing machine has detected potential flooding and activated its protective measures. Check for leaks and ensure the base of the machine is dry.
W28: Anti-Allergen Cycle Issue
The anti-allergen or hygienic wash cycle is not operating efficiently. Ensure you’re using the recommended detergent and that the drum isn’t overloaded.
W29: Tub Clean Cycle Inefficiency
The self-cleaning cycle for the tub isn’t functioning properly. Check for obstructions or excessive scaling inside the drum.
W30: Noise Level Abnormality
The machine is producing more noise than usual during operation. Ensure it’s placed on a stable surface and that there are no foreign objects inside.
W31: End-of-Cycle Signal Fault
The signal indicating the end of a wash cycle isn’t sounding. This might be a speaker or software issue.
W32: Internal Lighting Issue
If your machine has internal drum lighting, it’s malfunctioning or not illuminating. The bulb might need replacement or there could be a connection issue.
W33: Eco Mode Malfunction
The eco mode of your washing machine isn’t optimizing water and energy use. This might be due to sensor errors or misconfigured settings.
W34: Fabric Softener Dispensing Issue
The fabric softener isn’t being dispensed correctly. Check the dispenser compartment for clogs or detergent buildup.
W35: Prewash Cycle Error
There’s an issue with the prewash cycle, and it might not be effectively soaking or treating your clothes. Ensure appropriate settings are selected for your load.
W36: Error Accessing User Profiles
If your machine allows for user profiles, there’s an error accessing them. Consider resetting user settings or consult the user manual.
W37: Internal Humidity Sensor Fault
The sensor monitoring humidity inside the drum is malfunctioning. This may affect drying features if present in the machine.
W38: Quick Wash Cycle Inefficiency
The quick wash cycle isn’t completing in the expected time. Check for issues with water pressure or temperature.
W39: Unusual Foam Detection
Excessive foam has been detected, which can affect the washing efficiency. Ensure you’re using the correct amount and type of detergent.
W40: Steam Wash Feature Error
If your machine has a steam wash feature, it’s malfunctioning. There might be issues with the water heating system or steam dispensing mechanisms.
W41: Wool Cycle Inefficiency
The designated wool cycle isn’t providing gentle care as expected. Ensure that the load doesn’t exceed capacity and appropriate settings are used.
W42: Lint Filter Warning
The lint filter might be full or obstructed, reducing the machine’s efficiency. Clean and inspect the lint filter regularly for optimal performance.
W43: Connectivity Error
If your washing machine has smart connectivity features, it’s facing issues connecting to the network. Ensure stable Wi-Fi or network connection.
W44: Load Size Detection Error
The machine’s sensor to determine load size is malfunctioning, which may lead to inefficient washing. Manually select load size if possible.
W45: Oxidation Sensor Fault
If your machine uses an oxidation-based cleaning feature, the sensor related to it is malfunctioning. Cleaning efficiency might be compromised.
W46: Sanitize Cycle Issue
The sanitize cycle, meant for high-temperature cleaning, is not reaching the desired temperatures. Check the heating element and relevant sensors.
W47: Drum Light Indicator Fault
The indicator light inside the drum, if equipped, isn’t functioning. The light might need replacement or check for connection issues.
W48: Aroma Dispensing Error
If your machine has an aroma or fragrance dispensing feature, it’s not releasing the scent effectively. Check the dispenser for blockages or fill status.
