The commercial dryers from Cissell have generally performed admirably, effectively drying large loads. On a couple of occasions, we experienced issues with the heating elements. Fortunately, the service response was relatively quick, and the technicians efficiently replaced the faulty components, minimizing our downtime.
E01: Overheating Error
The dryer is detecting temperatures higher than safety thresholds.
E02: Door Lock Error
The dryer cannot lock or unlock the door properly.
E03: Drum Rotation Error
The dryer drum is having trouble rotating or isn’t rotating at all.
E04: Sensor Fault
A malfunctioning sensor is either sending incorrect data or no data at all.
E05: Motor Fault
There’s an issue with the machine’s motor, such as not turning or turning with difficulty.
E06: Venting Issue
The dryer has detected a blockage or issue in the venting system.
E07: Control Board Error
There’s an error with the electronic control board, which may require resetting or replacing.
E08: Air Flow Problem
The dryer is not receiving adequate airflow, which can affect drying efficiency.
E09: Communication Error
Internal components or systems within the dryer are not communicating correctly.
E10: Moisture Sensor Error
The sensors that detect moisture levels in the clothes are malfunctioning.
E11: Heating Element Fault
The heating element isn’t working, causing clothes not to dry adequately.
E12: Blower Fan Error
There’s an issue with the blower fan, which affects the movement of hot air inside the dryer.
E13: Gas Valve Error (for gas dryers)
The gas valve isn’t opening properly, causing inadequate or no heating.
E14: Ignition Failure (for gas dryers)
The ignitor is malfunctioning and failing to ignite the gas burner.
E15: Lint Filter Warning
The lint filter needs cleaning to ensure proper airflow and prevent potential fire hazards.
E16: Belt Breakage or Slippage
The dryer belt, which turns the drum, is either broken or slipping.
E17: Power Supply Issue
There are problems related to power supply, either voltage drops or interruptions.
E18: Inconsistent Drying
Clothes are not drying evenly, potentially due to uneven loads or sensor issues.
E19: Cool Down Issue
The dryer is unable to cool down properly after the drying cycle.
E20: User Interface Malfunction
The control panel or touch interface is unresponsive or malfunctioning.
E21: Exhaust Thermistor Fault
The exhaust thermistor, which monitors exhaust temperature, is malfunctioning or out of range.
E22: Flame Sensor Fault (for gas dryers)
The flame sensor, which monitors the gas burner flame, isn’t detecting the flame correctly.
E23: Cycle Time Too Long
The drying cycle is taking much longer than expected, indicating potential inefficiencies or faults.
E24: Drive Motor Relay Fault
The relay responsible for controlling the drive motor is malfunctioning.
E25: Steam Valve Fault (for steam models)
The valve regulating steam input is not functioning correctly.
E26: Internal Memory Error
The dryer’s internal memory or software has encountered an error or corruption.
E27: Steam Generator Fault (for steam models)
There’s an issue with the component responsible for generating steam in steam-based models.
E28: Water Inlet Valve Error (for steam models)
The water inlet valve, supplying water for steam generation, is malfunctioning.
E29: Restricted Airflow
A decrease in airflow is detected, potentially due to vent blockages or other obstructions.
E30: Drum Light Fault
The internal drum light, if present, is not working as expected.
