Constructa refrigerators have been dependable for food storage. I did experience an issue with a refrigerator door not sealing correctly. Customer service responded promptly, and the technician fixed the problem efficiently.
E01: Temperature Sensor Fault
The refrigerator’s internal temperature sensor is malfunctioning or not providing readings within the expected range.
E02: Defrosting Error
There’s an issue with the automatic defrosting system, potentially related to the heater, sensors, or control board.
E03: Evaporator Fan Error
The fan responsible for circulating air over the evaporator coils is not functioning properly or is jammed.
E04: Compressor Overload
The compressor, which helps refrigerate the system, is experiencing an overload or is overheating.
E05: Door Seal Leak
The seal around the refrigerator or freezer door is not sealing properly, leading to temperature inconsistencies and energy inefficiency.
E06: Water Dispenser Fault
There’s an issue with the water dispenser, such as blockages, leaks, or sensor problems.
E07: Icemaker Malfunction
The icemaker isn’t producing ice or is not cycling correctly.
E08: Condenser Fan Error
The fan responsible for cooling the condenser coils at the back or bottom of the refrigerator is malfunctioning.
E09: Cooling System Failure
The refrigerator’s cooling system isn’t maintaining temperatures, which could be due to various component failures.
E10: Drain Pan Overflow
The drain pan, which collects water during the defrost cycle, is overflowing or not draining correctly.
E11: Control Board Communication Error
There’s a communication failure between different components or modules within the refrigerator.
E12: Power Supply Irregularity
The refrigerator is experiencing inconsistent power supply, possibly due to voltage fluctuations or interruptions.
E13: Refrigerant Leak
There’s a potential leak of refrigerant in the system, which can impact cooling efficiency.
E14: Interior Light Fault
The internal light of the refrigerator or freezer isn’t working, potentially due to a bulb issue or electrical connections.
E15: Airflow Restriction
Reduced airflow inside the refrigerator, which can be caused by blockages, fan issues, or overloading.
E16: Water Filter Replacement Required
The water filter for the dispenser or icemaker needs replacement due to saturation or clogging.
E17: Damper Control Fault
The damper control, which adjusts airflow between the refrigerator and freezer compartments, is malfunctioning.
E18: High Humidity Alert
The refrigerator’s sensors detect higher than normal humidity levels, potentially affecting food preservation.
E19: Thermistor Error
An issue with the thermistor, which measures temperature, leading to inaccurate temperature readings.
E20: Motor Overload or Jam
A motor within the refrigerator, such as one for a fan or dispenser, is experiencing an overload or is jammed.
E21: Freezer Over-temperature
The freezer compartment’s temperature is rising beyond the set point, possibly due to a cooling problem or door seal issue.
E22: Refrigerator Over-temperature
The refrigerator compartment’s temperature is higher than expected, which might be attributed to various potential causes including airflow problems or thermostat malfunctions.
E23: Inverter Board Fault
There’s an issue with the inverter board, affecting the compressor’s speed and efficiency.
E24: Water Inlet Valve Malfunction
The water inlet valve, which controls water supply to the icemaker or dispenser, is malfunctioning or clogged.
E25: Door Open Alert
The refrigerator doors have been left open for an extended period, leading to potential cooling inefficiency.
E26: Condenser Coil Cleaning Required
The condenser coils, which dissipate heat, are dirty or clogged, leading to reduced efficiency and potential overheating.
E27: Voltage Fluctuation Detected
The refrigerator is detecting irregularities in the power supply which might affect its functionality.
E28: Sabbath Mode Error
For models that feature a Sabbath mode, this error signifies there’s an issue activating or deactivating this mode.
E29: Rapid Cool/Frost Feature Error
There’s an issue with the rapid cooling or rapid frost feature, not achieving the desired temperatures in the expected timeframe.
E30: Door Alarm Sensor Fault
The sensor which triggers an alarm if the door is left open is malfunctioning or not responding.
