Deciphering the Causes of Brandt Dishwasher Breakdowns: An In-Depth Look

Jul 22, 2023, 13:11pm

Dishwasher problems are usually based on poor maintenance or component failure. Faced with this kind of situation, it is important to determine the damaged part. It will then have to be replaced to fix the fault.

Brandt dishwashers display error codes in the form of messages or flashing lights to indicate a possible problem. There are many types of failures and possible causes:

  • The spray arm is damaged
  • The dishwasher does not heat up
  • Circulation and drain pumps no longer work
  • The power supply is faulty
  • The dishwasher has an electronic fault
  • The dishwasher is leaking or has filling problems

Brandt dishwashers are renowned for their functionality and efficiency, playing an essential role in kitchens worldwide. However, as with any appliance, a Brandt dishwasher is not immune to occasional problems that can lead to breakdowns. This article aims to elucidate some of the common issues that may lead to a Brandt dishwasher breakdown and the possible remedies.

Deciphering the Causes of Brandt Dishwasher Breakdowns: An In-Depth Look

Common Causes of Breakdown

Various issues can lead to a Brandt dishwasher breakdown. Here are some of the most common problems:

  1. Improper Loading: Overloading or incorrect placement of dishes may lead to inefficient cleaning and can potentially cause damage to the dishwasher’s internal components.
  2. Drainage Issues: If your dishwasher is not draining properly, it may be due to a blocked filter, a clogged drain hose, or a faulty drain pump.
  3. Water Supply Issues: Problems with water supply, like a defective water inlet valve, a kinked hose, or a problem with your home’s water pressure, can lead to the dishwasher not filling properly, thereby causing breakdowns.
  4. Control Panel or Software Problems: Sometimes, the control panel or software of the dishwasher may malfunction, causing issues like the dishwasher refusing to start, not completing cycles, or randomly changing settings.
  5. Heating Element Failure: If the dishwasher is not cleaning dishes properly or leaving them wet, the problem might be with the heating element, which is responsible for heating the water and drying the dishes.
  6. Wear and Tear: Regular use of the dishwasher can lead to wear and tear of components like the spray arms, racks, and door latch, which may eventually need replacement.

Prevention and Solutions

Here are several steps that can be taken to prevent a Brandt dishwasher breakdown:

  1. Regular Maintenance: It’s essential to regularly check and clean the filters, spray arms, and seals to prevent buildup and ensure your dishwasher runs smoothly.
  2. Proper Loading: Always load the dishwasher as per the manufacturer’s instructions, ensuring that the spray arms can rotate freely and that the water can reach all the dishes.
  3. Address Drainage Issues: If your dishwasher isn’t draining correctly, check and clean the drain filter and hose. If the problem persists, the drain pump might need replacing.
  4. Check Water Supply: Ensure the water supply line is not kinked or blocked and that your home has proper water pressure. If the dishwasher isn’t filling with water, the water inlet valve might need to be replaced.
  5. Professional Help for Electronic Issues: If you’re experiencing issues with the control panel or software, it’s advisable to call in a professional. They can diagnose and fix the problem and update the software if necessary.
  6. Check the Heating Element: If your dishwasher isn’t cleaning or drying dishes properly, the heating element might need checking. A professional can test and replace it if necessary.
  7. Replace Worn-Out Parts: Regularly check for worn-out parts and replace them as necessary. This can prevent further damage and keep your dishwasher running optimally.


The dishwasher is equipped with two wash arms that spray water onto the dirty kitchen utensils in the dishwasher basket. Thus, the quality of cleaning depends on the correct functioning of these parts. These are the drums that are responsible for watering the plates. Fragile cutlery such as china or crystal glasses are cleaned with a small tube.

Your Brandt dishwasher may still turn on and operate when these components fail. However, washing may be of poor quality.

  • Check the condition of the washing arms of your household appliance.
  • Foreign bodies can block the rotation of these elements. Therefore, it is important to clean it regularly.

If this problem persists, consider replacing the affected part.

Deciphering the Causes of Brandt Dishwasher Breakdowns: An In-Depth Look


If you notice that your dishes are poorly cleaned, then your appliance may not be heating properly. Cleaning is carried out with hot water for a more effective result.

The immersion heater or resistance is the part in charge of heating the water. Thus, to check if the resistor is the cause of the breakdown, it must be tested using a multimeter.

  • Its value should be about 28 ohms.
  • If the resistance is in good condition, it is the pressure switch that must be checked. Indeed, this part has the function of detecting water and managing its volume.

Finally, if the resistance is functional, it may be the temperature sensor that is faulty. This part controls the water temperature. Like the resistance, the test of 2 other components is carried out with a multimeter in the Ohmmeter position.


Pumps are used to convey water through the entire machine. The circulation pump takes care of sucking up the volume of water necessary for cleaning, while the drain pump takes care of the evacuation of waste water.

If you notice that the water is stagnating at the bottom of the tank, there is a drainage problem. In addition, when the tank does not fill properly with water, this part is defective.

  • Check the condition of both pumps.
  • Also check the drain pipe, the filter and the water level detection system.

In conclusion, understanding the reasons behind your Brandt dishwasher breakdown is the first step to preventing and addressing the issue. With regular maintenance, proper use, and timely professional intervention when required, you can ensure your dishwasher’s longevity and consistent performance. After all, taking care of your Brandt dishwasher means ensuring many years of trouble-free service.