Defy washing machines have been reliable for laundry needs, but service experiences have been inconsistent. Service response times have varied, with occasional delays in technician availability. While accurate diagnosis is usually a strength, there was one instance of misdiagnosis, leading to an unnecessary part replacement. Improved parts availability and communication would enhance the service.
E02: Water Inlet Valve Issue
There’s a problem with the water inlet valve in the washing machine, affecting water supply and filling during wash cycles.
E03: Drainage Pump Error
The drainage pump in the washing machine is not functioning correctly, leading to water not being properly drained after wash cycles.
E04: Drum Rotation Problem
There’s an issue with the drum’s rotation mechanism in the washing machine, affecting the washing and spinning process.
E05: Load Imbalance
The washing machine has detected a load imbalance, causing the machine to stop to prevent damage to the drum.
E06: Overheating Protection
The washing machine has detected an overheating condition and has initiated a protective shutdown to prevent damage.
E07: Detergent Dispenser Error
There’s a problem with the detergent dispenser in the washing machine, affecting detergent distribution during wash cycles.
E08: Motor Drive Fault
There’s a fault in the motor drive system of the washing machine, affecting drum movement and wash cycle operation.
E09: Control Panel Communication Error
There’s a communication error between the control panel and other components of the washing machine, affecting cycle selection and progression.
E10: Water Temperature Sensor Error
The washing machine’s water temperature sensor is malfunctioning, affecting temperature control during wash cycles.
E11: Spin Cycle Error
There’s an issue with the spin cycle of the washing machine, affecting the spinning and drying process.
E12: Timer Control Error
There’s an issue with the timer control mechanism of the washing machine, affecting cycle progression.
E13: Water Pressure Problem
The washing machine is experiencing low water pressure, affecting water supply and filling during wash cycles.
E14: Door Seal Leak
There’s a leak in the door seal of the washing machine, leading to water leakage during wash cycles.
E15: Excessive Foam Detected
The washing machine has detected excessive foam or suds in the drum, affecting wash quality.
E16: Lid Lock Issue
If applicable to your washing machine, there’s a problem with the lid lock mechanism, preventing the lid from locking securely during operation.
E17: Drain Hose Blockage
The drain hose of the washing machine is blocked or restricted, leading to poor drainage and longer wash times.
E18: Drum Bearing Fault
There’s an issue with the drum bearings in the washing machine, leading to unusual noises during operation.
E19: Balance Sensor Error
The washing machine’s balance sensor is malfunctioning, affecting load distribution and balance during wash cycles.
E20: Water Level Sensor Issue
The water level sensor in the washing machine is not functioning correctly, affecting water level control during wash cycles.
E21: Motor Overload
The washing machine’s motor is overloaded, causing the machine to stop to prevent damage.
E22: Drum Belt Problem
The drum belt that drives the rotation of the washing machine’s drum is loose or damaged, affecting the washing and spinning process.
E23: Control Board Communication Error
There’s a communication error between the control board and other components of the washing machine, affecting cycle selection and operation.
E24: Inlet Hose Issue
There’s a problem with the inlet hose of the washing machine, affecting water supply and filling during wash cycles.
E25: Dispenser Drawer Error
There’s an issue with the detergent or fabric softener dispenser drawer in the washing machine, affecting proper dispensing during wash cycles.
E26: Drain Pump Motor Problem
The drain pump motor in the washing machine is not functioning correctly, leading to water not being properly drained after wash cycles.
E27: Vibration Sensor Fault
The washing machine’s vibration sensor is malfunctioning, affecting load distribution and balance during wash cycles.
E28: Drum Temperature Abnormality
The washing machine’s temperature control system has detected abnormal temperature levels, affecting wash performance.
E29: Control Panel Keypad Error
There’s an issue with the control panel keypad of the washing machine, affecting the selection of cycle options.
E30: Door Handle Problem
The door handle of the washing machine is malfunctioning, affecting the door’s open and close functionality.
E31: Motor Brushes Worn
The motor brushes in the washing machine’s motor are worn out, affecting the motor’s performance and rotation.
