Haier dishwashers are designed to streamline dishwashing tasks. They offer multiple wash cycles and adjustable racks for efficient and thorough cleaning of dishes. These dishwashers are known for their quiet operation and energy efficiency, making them a valuable addition to any kitchen.
E01: Door Sensor Fault
The dishwasher can’t detect the door’s open or closed state correctly. Ensure the door latch is secure and free from obstructions.
E02: Water Inlet Error
The dishwasher is experiencing difficulty filling with water. Check the water supply and inlet valve for any blockages or kinks in the hose.
E03: Drainage Fault
Water is not draining effectively from the dishwasher. This could be due to a blockage in the drain hose or a faulty pump. Ensure the filter is also clean.
E04: Heating Element Error
The dishwasher’s heating element isn’t functioning as expected, possibly affecting the wash and dry cycles. Check the element for any visible damage or debris.
E05: Overflow Error
The dishwasher detects an overflow condition, possibly due to a faulty float switch or a blockage in the drainage system.
E06: Turbidity Sensor Fault
The sensor that measures the clarity of the water is malfunctioning. This can affect the dishwasher’s ability to determine the cleanliness of the dishes and the need for additional cycles.
E07: Dispenser Fault
The detergent or rinse aid dispenser isn’t operating correctly. Ensure it’s properly filled, and there’s no clogging or mechanical issues.
E08: Circulation Pump Fault
The circulation pump, responsible for moving water throughout the dishwasher, is malfunctioning. Check for blockages and ensure the pump motor is in good condition.
E09: Temperature Sensor Error
The dishwasher’s temperature sensor is producing inconsistent or erroneous readings. Ensure the sensor is correctly positioned and free from obstructions or damage.
E10: Water Leak Detected
A potential water leak has been detected at the base of the dishwasher. Inspect for any visible leaks and verify the door seals and hoses are intact.
E11: Drying Fan Fault
The fan used during the drying cycle is not working correctly. Ensure the fan is free from obstructions and verify its electrical connections.
E12: Software or Control Error
There’s an issue with the dishwasher’s internal software or control module. A reset might be necessary, and if the problem persists, the control board might require inspection or replacement.
E13: Door Lock Error
The dishwasher door isn’t locking securely. Check the latch mechanism for any damages or obstructions that might be causing the error.
E14: Flow Meter Malfunction
The flow meter, which measures the amount of water entering the dishwasher, is producing inaccurate readings. Ensure it’s free from debris and functioning correctly.
