How to Change or Clean the Filter in a SEB ActiFry Fryer

Aug 06, 2023, 18:22pm

The SEB Actifry electric fryer filter or cover prevents grease from food and frying oil from entering and damaging the components and motors of your fryer.

A broken or dirty filter is dangerous for your device and can cause a breakdown.

The fryer filter is located inside the fryer, concealed by the cooking vats. It is located opposite the resistance of the fryer which emits the heat necessary for cooking the food.

The SEB ActiFry Fryer is a popular kitchen appliance, known for creating healthier, delicious fried foods. However, to keep it functioning optimally, routine maintenance such as changing or cleaning the filter is crucial. This guide provides a detailed, step-by-step process on how to go about it.

Disclaimer: Safety is paramount. Always ensure that your fryer is unplugged and completely cooled down before starting any maintenance tasks. If you feel uncomfortable handling the appliance, consider hiring a professional.

How to Change or Clean the Filter in a SEB ActiFry Fryer

Part 1: Preparing for the Task

Step 1: Gather Necessary Materials: You’ll need a replacement filter if you’re changing it, or mild soap and warm water if you’re cleaning it. A soft cloth or sponge will also come in handy.

Step 2: Unplug and Cool Down: Unplug the fryer and allow it to cool completely before starting the task.

Part 2: Accessing the Filter

Step 3: Open the Fryer Lid: Carefully open the fryer lid. Most models of SEB ActiFry Fryers have a filter situated under the lid or near the rear of the appliance.

Step 4: Locate the Filter: Refer to your user manual to locate the filter. Usually, it’s housed in a cover that can be unclipped or unscrewed.

Part 3: Changing or Cleaning the Filter

Step 5: Remove the Filter: Carefully remove the filter. If it’s secured with a clip or latch, release it gently.

Step 6: Clean or Replace the Filter: If cleaning the filter, wash it gently with warm soapy water, then rinse and let it air dry. If you’re replacing the filter, simply dispose of the old one responsibly.

How to Change or Clean the Filter in a SEB ActiFry Fryer

Part 4: Replacing the Filter

Step 7: Install the Filter: Once the filter is clean and dry, or you have your replacement, reinstall it into the fryer. Make sure it’s securely positioned and the filter cover is firmly secured.

Part 5: Final Checks

Step 8: Test the Appliance: After the filter has been replaced or cleaned and reinstalled, conduct a test run. Add a small amount of oil and allow the fryer to run for a few minutes to ensure everything is functioning correctly.


Regular filter maintenance is a simple but essential aspect of maintaining your SEB ActiFry Fryer’s performance and longevity. A clean filter contributes to the fryer’s efficiency and improves the taste of your food. Always refer to your specific model’s user manual for detailed instructions and never hesitate to seek professional assistance if required. Proper care and maintenance will ensure your SEB ActiFry Fryer continues to serve you delicious, healthier fried foods for years to come.