How to Change the Base of a Steamer

Aug 03, 2023, 15:40pm

The soleplate of the steam iron is the metal surface through which the steam escapes and which allows ironing. It is an essential part of the steam generator.

Replace the steam generator soleplate if:

  • the sole has traces of limestone;
  • the steam generator is leaking;
  • the steam plant spits out water;
  • the steam generator no longer produces steam.

The soleplate of the steam generator refers to the metal part of the iron.

Steamers, be it garment steamers or food steamers, are versatile tools found in households and businesses alike. An integral part of these appliances is their base, which often houses key components like the heating element, water reservoir, and control panel. However, over time, the base can suffer damage or wear, impairing the appliance’s performance. This article will guide you through the process of changing the base of a steamer.

How to Change the Base of a Steamer

Signs of a Damaged Steamer Base

Before replacing the base, you should identify the signs that suggest it’s necessary:

  1. Visible Damage: Cracks, dents, or deformations on the base can impact its ability to function properly.
  2. Water Leaks: If you notice water seeping from the bottom of the appliance, it could indicate a problem with the base, particularly if it houses the water reservoir.
  3. Stability Issues: If the steamer has become unstable and doesn’t stand upright properly, the base may be damaged.

How to Change the Base of a Steamer

Step 1: Safety First

Always ensure the steamer is unplugged and cooled down before starting any repairs. Safety should always be your primary concern when dealing with electrical appliances.

Step 2: Procure a Replacement Base

You’ll need a new base that’s compatible with your specific steamer model. Check the manufacturer’s website or a reputable appliance parts retailer.

Step 3: Disassemble the Steamer

Refer to the user manual to understand how to disassemble your specific model. Generally, you’ll need to remove screws or fasteners to detach the top part of the steamer from its base.

Step 4: Disconnect the Base

Once you’ve separated the main components from the base, disconnect any wires or tubes connected to it. Be careful not to damage these components during removal. It’s a good idea to take a photo or make a note of the original setup to aid in reassembly.

How to Change the Base of a Steamer

Step 5: Install the New Base

Attach any necessary wires or tubes to the new base, referring to your photo or notes from the previous step. After that, reattach the main part of the steamer to the new base. Ensure it’s secured properly by tightening all screws or fasteners.

Step 6: Test the Steamer

With the new base installed, it’s time to test the appliance. Plug it in and ensure it stands stable, heats properly, and all functions are working correctly.


Changing the base of a steamer is a practical skill that can extend the life of your appliance. While these steps provide a general guideline, always refer to the user manual of your specific model to ensure you handle the process correctly. Don’t hesitate to contact a professional if you’re uncertain about any steps. Regular maintenance and timely replacements will ensure your steamer continues to serve you effectively for years to come.