The product box, or dispenser, is a receptacle where the washing product is placed. It is generally equipped with a valve or a pivoting lid to be closed after putting on the product.
The detergent box allows the dosing of detergent and rinse aid. It has an opening valve for the detergent, as well as a valve that opens the valve and distributes the rinse aid.
The detergent box can contain any detergent: detergent tablet, powder or gel. You can put rinsing product in the dedicated compartment or vinegar: it is more ecological but less effective.
The product drawer, also called a dispenser, is located at the front of the dishwasher, on the storm door.
The dispenser in a dishwasher plays a vital role in distributing detergent, rinse aid, and other cleaning agents during the wash cycle. Over time, the dispenser may become damaged or malfunction, affecting the cleaning performance of your dishwasher. If you notice that the dispenser is not working properly or if it’s leaking, it may be necessary to replace it. In this article, we will guide you through the process of changing the dispenser of a dishwasher.
1. Safety Precautions
Before you begin replacing the dispenser, ensure that the dishwasher is completely disconnected from its power source. This will prevent any electrical accidents and ensure your safety during the procedure.
2. Locate the Dispenser
The dispenser is typically located inside the dishwasher door. Consult your dishwasher’s manual or refer to the manufacturer’s instructions to find the specific position of the dispenser.
3. Remove the Old Dispenser
Follow these steps to remove the old dispenser:
- Open the Dishwasher Door: Fully open the dishwasher door and locate the dispenser.
- Release the Mounting Tabs: The dispenser is usually held in place by mounting tabs or screws. Release these tabs by pressing or unscrewing them, depending on the design of your dishwasher.
- Disconnect the Dispenser Components: Carefully disconnect any hoses, tubes, or wiring connections attached to the dispenser. Take note of the connections or take a photo for reference when connecting the new dispenser.
- Remove the Old Dispenser: Gently pull the old dispenser out of its position, ensuring that you do not damage any surrounding components.
4. Install the New Dispenser
Follow these steps to install the new dispenser:
- Position the New Dispenser: Place the new dispenser in the same position as the old one, ensuring it aligns with the mounting tabs or screw holes.
- Secure the Dispenser: Use the appropriate mounting tabs or screws to secure the new dispenser in place. Make sure it is firmly attached but be careful not to overtighten.
- Reconnect Dispenser Components: Reconnect any hoses, tubes, or wiring connections to the new dispenser, ensuring they are properly aligned and securely attached.
- Test the New Dispenser: With the new dispenser installed, it’s time to test its functionality. Reconnect the dishwasher to its power source and run a test cycle to ensure the dispenser is working correctly.
- Adjust Dispenser Settings: Depending on your dishwasher model, there may be adjustable settings for the dispenser, such as dosage control for detergent or rinse aid. Refer to your dishwasher’s manual to adjust these settings if needed.
5. Monitor for Leaks
During the test cycle and subsequent use, closely monitor the new dispenser for any signs of leaks. If you notice any leaks, turn off the dishwasher and check the connections to ensure they are properly sealed.
By following these steps, you can successfully change the dispenser of your dishwasher, ensuring proper distribution of cleaning agents during the wash cycle. Remember to consult your dishwasher’s manual or refer to the manufacturer’s instructions for any specific guidelines or recommendations. If you are unsure about replacing the dispenser yourself or encounter any difficulties during the process, it is recommended to seek the assistance of a professional appliance technician. They have the expertise and tools necessary to safely and effectively replace the dispenser.
