How to Change the Door Handle of a Washing Machine

Jul 10, 2023, 16:07pm

The door handle of your washing machine is the part you use all the time to open your door and then put your laundry in the machine. Repeated use and time will wear down this handle and reduce its effectiveness, which could be disturbing in the daily use of your washing machine.

In a washing machine, the handle is only operational when the machine is inactive, i.e. out of cycle, because an electromagnet locks it and blocks its use during the wash cycle.

If the door handle of the washing machine is faulty, you may notice different problems:

  • The door can no longer be manipulated: the handle spring is broken and you can no longer open or close the door.
  • The door no longer closes: the lugs inside are broken.
  • The door no longer opens.

The door handle of a washing machine is located at the front, on the door. It is generally made of plastic, which can crack or deteriorate over time and with use.

The door handle of a washing machine is an important component that allows you to open and close the door securely. However, over time, the door handle can become damaged, loose, or break, making it difficult to operate the washing machine. If you’re facing issues with the door handle, it may be necessary to replace it. Fortunately, changing the door handle is a relatively simple task that can be done with the right tools and careful attention. In this guide, we will walk you through the steps to change the door handle of a washing machine.

How to Change the Door Handle of a Washing Machine

Safety Precautions

Before starting any repair work on your washing machine, it is important to prioritize safety. Always unplug the machine from the power source before attempting any repairs. Additionally, ensure you are working in a well-lit area and wear protective gloves to prevent injury.

Tools Required

To change the door handle of a washing machine, you will need the following tools:

  • Screwdriver set (Phillips or Torx, depending on your machine)
  • Towels or rags (to protect the floor and clean up any spills)

Steps to Change the Door Handle

Follow these steps to change the door handle of a washing machine:

Step 1: Unplug the Washing Machine

Ensure the washing machine is disconnected from the power source by unplugging it from the wall socket.

Step 2: Locate the Door Handle Assembly

Inspect the washing machine’s door to identify how the handle is attached and secured. Depending on the model, the handle may be secured with screws or clips. Consult your washing machine’s user manual or search online for specific information about accessing and changing the door handle in your particular model.

Step 3: Remove the Old Door Handle

Using a screwdriver, remove the screws or clips that secure the old door handle in place. Set the screws or clips aside in a safe place. Carefully pull the old door handle away from the washing machine’s door, taking note of its orientation.

Step 4: Prepare the New Door Handle

Take the new door handle and ensure it is the correct replacement for your washing machine’s model. Orient the new door handle correctly based on the markings or shape of the old handle. This will ensure a proper fit.

Step 5: Attach the New Door Handle

Position the new door handle on the washing machine’s door, aligning it with the holes or slots left by the old handle. Insert the screws or clips through the handle and into the corresponding holes or slots. Use a screwdriver or apply pressure to secure the door handle firmly in place.

Step 6: Test the New Door Handle

Gently pull and push the new door handle to ensure it operates smoothly and securely. Make sure it latches and releases the door properly.

Step 7: Reassemble the Washing Machine

Once you have completed the door handle replacement, reassemble any covers or panels you removed earlier to access the handle assembly. Use the appropriate screws or clips to secure these components back in place.

How to Change the Door Handle of a Washing Machine

Step 8: Test the Machine

Plug your washing machine back into the power source. Open and close the door using the new handle. Ensure the door locks securely and the machine functions correctly without any issues. If the machine operates properly, it indicates that the new door handle is properly installed.

If you encounter any persistent problems or suspect a fault with the door handle despite the replacement, it is recommended to consult a professional appliance repair technician or contact the manufacturer for further assistance.

In conclusion, changing the door handle of a washing machine is a relatively simple task that can greatly improve the usability of the machine. By following these steps and using the appropriate tools, you can successfully replace a damaged or broken door handle and restore the proper functioning of your washing machine. Always refer to your washing machine’s user manual for specific instructions and guidelines, as different models may have slight variations in the door handle replacement process. Regular maintenance and prompt door handle replacement will help ensure the optimal performance of your washing machine.


“If you’re in Toronto or the Greater Toronto Area and need your washing machine repairing service urgently, contact Shymon Appliance Repair, we know how to fix it!”