How to Change the Door Hinges of a Dishwasher

The hinges are metal parts attached directly to the exterior sheet metal of the dishwasher. Another part of the hinges is fixed on the tank. They allow the door of the dishwasher to be opened.

The door is an element of the dishwasher that is very stressed by the openings and closings during its loading. It therefore happens that the hinges twist following accidental pressing on the door in the open position.

Hinges should be replaced when bent or deformed. You can observe that the hinges are damaged when the door is not completely perpendicular to the dishwasher or when there are leaking problems.

The hinges are located on each side of the dishwasher door.

The door hinges of a dishwasher are crucial for smooth and secure opening and closing of the dishwasher door. Over time, the hinges may become worn out or damaged, causing the door to sag or not close properly. If you’re experiencing issues with the door hinges of your dishwasher, it may be necessary to replace them. In this article, we will guide you through the process of changing the door hinges of a dishwasher.

1. Safety Precautions

Before starting the process of changing the door hinges, ensure that the dishwasher is completely disconnected from its power source. This will prevent any electrical accidents and ensure your safety during the procedure.

2. Access the Door Hinges

The door hinges are typically located on the sides of the dishwasher, connecting the door to the main body of the appliance. To access the hinges, follow these steps:

1. Open the Dishwasher Door: Fully open the dishwasher door to expose the hinges.
2. Remove the Bottom Access Panel: Depending on the design of your dishwasher, you may need to remove the bottom access panel to access the hinges. Use a screwdriver to remove any screws securing the panel and then carefully lift it off.
3. Support the Door: While working on the hinges, it’s important to support the weight of the dishwasher door. You can use a support bracket or ask someone to hold the door for you.

3. Remove the Old Door Hinges

Follow these steps to remove the old door hinges:

1. Disconnect the Hinge Cables or Springs: Depending on your dishwasher model, there may be cables or springs attached to the hinges. These are responsible for counterbalancing the weight of the door. Carefully disconnect these cables or springs from the hinges, taking note of their positions for reassembly.
2. Unscrew the Hinges: Using a screwdriver, remove the screws securing the hinges to the dishwasher. Keep track of the screws as you will need them for the installation of the new hinges.
3. Remove the Old Hinges: Once the screws are removed, carefully lift and remove the old hinges from their positions.

4. Install the New Door Hinges

Follow these steps to install the new door hinges:

1. Position the New Hinges: Take the new door hinges and position them in the same locations as the old ones. Ensure that the hinges are correctly aligned with the screw holes in the dishwasher.
2. Screw in the Hinges: Use the screws that were removed from the old hinges to secure the new hinges in place. Tighten the screws securely but avoid over-tightening.
3. Reconnect the Hinge Cables or Springs: Attach the cables or springs to the new hinges, ensuring they are properly connected and in the correct positions.
4. Test the Door Movement: Gently close and open the dishwasher door to test the movement and ensure that it operates smoothly.

5. Reassemble the Dishwasher

Once you have successfully installed the new door hinges, it’s time to reassemble the dishwasher:

1. Place the Bottom Access Panel: If you removed the bottom access panel, carefully place it back in position and secure it with the screws.
2. Reconnect the Power Supply: Restore the power supply to the dishwasher by plugging it back into the electrical outlet.
3. Test the Door Operation: Run a test cycle on the dishwasher and monitor the door’s operation to ensure it closes and seals properly.

By following these steps, you can successfully change the door hinges of your dishwasher, restoring smooth and secure door operation. Remember to consult your dishwasher’s manual or refer to the manufacturer’s instructions for any specific guidelines or recommendations. If you are unsure about changing the door hinges yourself or encounter any difficulties during the process, it is recommended to seek the assistance of a professional appliance technician. They have the expertise and tools necessary to safely and effectively replace the door hinges.