The fan motor disperses the heat produced by the fryer’s resistance throughout the appliance. It is a main factor in the homogeneous cooking of food within the appliance.
The fan motor must be replaced if the food is half cooked despite the correct operation of the stirring blade and the heating element.
If the fryer does not make any fan noise, or if the fan legs are broken, you will need to completely replace the fan motor, which forms a single block.
The fan motor is protected by a cover at the rear of your fryer. Its visible part is the fan which constitutes the engine block.
The fan motor in a SEB ActiFry Fryer plays a crucial role in circulating hot air, ensuring your food is evenly cooked. If your fan motor is malfunctioning or has stopped working entirely, replacing it is essential. This guide will walk you through the steps required to change the fan motor.
Disclaimer: Please remember that safety is paramount. Unplug the fryer and let it cool down before you start. If you’re not confident about handling electrical appliances, consider seeking professional help.
Part 1: Preparation
Step 1: Buy the Replacement Motor: You will need a compatible replacement fan motor for your specific SEB ActiFry model. These can typically be found through the manufacturer or an online retailer.
Step 2: Gather the Necessary Tools: Depending on your fryer model, you may need a screwdriver and a pair of pliers.
Step 3: Unplug and Cool Down: Always unplug the fryer and allow it to cool before starting the replacement process.
Part 2: Removing the Old Fan Motor
Step 4: Open the Fryer: Open the fryer’s lid and remove the cooking pan and the paddle.
Step 5: Locate the Fan Motor: Refer to your fryer’s manual to locate the fan motor. It’s typically housed underneath the heating element.
Step 6: Disconnect the Motor: Before you start, take a photo of the wiring arrangement. It will serve as a helpful reference when installing the new motor. Disconnect the wires from the motor using your pliers.
Step 7: Remove the Motor: Unscrew the motor from its housing and carefully remove it.
Part 3: Installing the New Fan Motor
Step 8: Position the New Motor: Align your new motor in the housing, ensuring it matches the position of the old motor.
Step 9: Secure the Motor: Screw the new motor into place. Be careful not to over tighten as this could damage the screws or the motor.
Step 10: Connect the Wiring: Refer to the photo taken earlier and reconnect the wires to the new motor.
Part 4: Final Checks
Step 11: Replace the Components: Replace the paddle and the cooking pan, and close the lid.
Step 12: Test Run: Plug in the fryer and turn it on. Check that the fan is operating correctly and that hot air is being circulated.
Conclusion
Replacing the fan motor in a SEB ActiFry Fryer is a relatively straightforward process that can greatly extend the life and efficiency of your appliance. Always remember to refer to your specific model’s user manual for guidance, and don’t hesitate to seek professional help if you’re unsure. With the right maintenance and care, your SEB ActiFry Fryer will continue to provide delicious, healthy meals for years to come.
