How to Change the Motor in a SEB ActiFry Fryer

Aug 06, 2023, 18:43pm

The motor of a SEB Actifry electric fryer is an essential element for the operation of the device. It drives the stirring paddle, which turns the food and helps cook it evenly.

If the blade does not turn, it will probably be necessary to replace the motor. For that,

  • Disassemble the components of the fryer
  • Replace fryer motor
  • Reassemble the fryer.

The motor of the SEB Actifry fryer is located just below the trim of the appliance.

If your SEB ActiFry Fryer’s motor has stopped working or is functioning erratically, you may need to replace it to restore your appliance’s performance. This guide will walk you through the steps to replace the motor in your SEB ActiFry Fryer.

Disclaimer: Safety is paramount. Always unplug your fryer and allow it to cool down before attempting any repairs. If you are uncomfortable with handling electrical appliances, it’s always best to hire a professional.

How to Change the Motor in a SEB ActiFry Fryer

Part 1: Preparation

Step 1: Gather the Necessary Supplies: You’ll need a compatible replacement motor for your specific SEB ActiFry model and a screwdriver.

Step 2: Unplug and Cool Down: Always unplug the fryer and allow it to cool before beginning the replacement process.

Part 2: Accessing the Motor

Step 3: Open the Fryer: Remove the cooking pan and the paddle.

Step 4: Locate the Motor: The motor is typically located underneath the heating element. Consult your fryer’s manual if you’re unsure.

Step 5: Remove the Cover: There will likely be a cover shielding the motor. Use your screwdriver to remove this. Keep track of the screws, as you’ll need them to replace the cover.

How to Change the Motor in a SEB ActiFry Fryer

Part 3: Replacing the Motor

Step 6: Disconnect the Old Motor: Before disconnecting anything, it’s a good idea to take a photo to remember how the wires are connected. Then, carefully disconnect the wires from the old motor using your screwdriver or a pair of pliers.

Step 7: Remove the Old Motor: The motor should be attached with screws. Unscrew these and remove the old motor.

Step 8: Install the New Motor: Place the new motor where the old one was and screw it in. Be careful not to overtighten the screws.

Step 9: Connect the New Motor: Refer to the photo you took earlier and connect the wires to the new motor.

Part 4: Finalizing the Process

Step 10: Replace the Cover: Reinstall the cover using the screws you removed earlier.

Step 11: Replace the Components: Replace the paddle and the cooking pan, and close the lid.

Step 12: Test the Appliance: Plug in the fryer and do a test run to ensure the new motor is working correctly.


Replacing the motor in your SEB ActiFry Fryer might seem daunting, but with a little patience and care, it’s a manageable task. Regular maintenance and timely replacement of parts will extend the life of your appliance and ensure it continues to deliver tasty, healthy meals for your family. Always consult your user manual for any specific instructions or reach out to a professional if in doubt.