Shock absorbers keep your washing machine stable during wash cycles.
You need to replace your washing machine’s shock absorbers when:
- Your device vibrates strongly during a program,
- You hear an unusual noise when the washing machine is running,
- Your washing machine moves or is unstable during operation.
Shock absorbers are located in the internal structure of your washing machine. They are on the lower side, below the tank.
The shock absorbers in a washing machine play a crucial role in minimizing vibrations and stabilizing the drum during the wash and spin cycles. Over time, these shock absorbers can wear out or become damaged, resulting in excessive noise, increased vibrations, or even movement of the machine during operation. If you’re experiencing these issues, it may be necessary to replace the shock absorbers. Changing the shock absorbers of a washing machine is a task that requires some technical knowledge and the use of appropriate tools. In this guide, we will walk you through the steps to change the shock absorbers of a washing machine.
Safety Precautions
Before starting any repair work on your washing machine, it is important to prioritize safety. Always unplug the machine from the power source before attempting any repairs. Additionally, ensure you are working in a well-lit area and wear protective gloves to prevent injury.
Tools Required
To change the shock absorbers of a washing machine, you will need the following tools:
- Screwdriver set (Phillips or Torx, depending on your machine)
- Pliers or adjustable wrench
- Towels or rags (to protect the floor and clean up any spills)
Steps to Change the Shock Absorbers
Follow these steps to change the shock absorbers of a washing machine:
Step 1: Unplug the Washing Machine
Ensure the washing machine is disconnected from the power source by unplugging it from the wall socket.
Step 2: Access the Shock Absorbers
The shock absorbers are usually located at the bottom of the washing machine, near the front or rear. Refer to your washing machine’s user manual or search online for specific information about the location of the shock absorbers in your particular model.
Step 3: Remove the Service Panel
Remove any panels or covers that obstruct access to the shock absorbers. This may involve removing the front or rear panel of the machine. Take caution and follow safety guidelines while removing components to prevent damage or injury.
Step 4: Identify the Shock Absorbers
Once you have access to the shock absorbers, identify the number of shock absorbers and their positions. Washing machines typically have two or four shock absorbers, depending on the model.
Step 5: Remove the Old Shock Absorbers
Using a screwdriver or appropriate tool, loosen and remove the bolts or fasteners that secure the old shock absorbers to the washing machine’s frame. Take note of their positions for proper reassembly.
Step 6: Detach the Shock Absorbers
Once the bolts or fasteners are removed, carefully detach the old shock absorbers from the washing machine’s frame. This may involve disconnecting any mounting brackets or clips holding the shock absorbers in place.
Step 7: Install the New Shock Absorbers
Take the new shock absorbers and align them with the mounting positions on the washing machine’s frame. Ensure they fit snugly and align properly. Attach any mounting brackets or clips as necessary.
Step 8: Secure the New Shock Absorbers
Insert and tighten the bolts or fasteners to secure the new shock absorbers to the washing machine’s frame. Ensure they are tightened properly but not overly tightened to avoid damage.
Step 9: Reassemble the Service Panel
Once you have installed the new shock absorbers, reassemble any panels or covers you removed earlier to access the shock absorbers. Use the appropriate screws or fasteners to secure these components back in place.
Step 10: Test the Machine
Plug your washing machine back into the power source. Run a test cycle to ensure that the new shock absorbers effectively reduce vibrations and stabilize the drum during operation. Observe the machine’s operation and listen for any unusual noises or excessive movements.
If you encounter any persistent problems or difficulties during the replacement process, it is recommended to consult a professional appliance repair technician or contact the manufacturer for further assistance.
In conclusion, changing the shock absorbers of a washing machine is a task that requires some technical knowledge and attention to detail. By following these steps and using the appropriate tools, you can successfully replace faulty or worn-out shock absorbers and restore stability and quiet operation to your washing machine. Always refer to your washing machine’s user manual for specific instructions and guidelines, as different models may have slight variations in the shock absorber replacement process. Regular maintenance and prompt shock absorber replacement will help ensure smooth and efficient operation of your washing machine.
“If you’re in Toronto or the Greater Toronto Area and need your repair service for washing machine Toronto urgently, contact Shymon Appliance Repair, we know how to fix it!”
