How to Change the Tank and Water Tray of a DeLonghi Coffee Maker

Aug 05, 2023, 12:06pm

The water tank holds enough water to make several coffees. This part is to be changed when you spot cracks on your tank, water leaks or poor maintenance of the closing of the tank.

The plastic container is the container that collects the coffee that flows out of the cup. It should be changed when you spot cracks on your collector or water leaks.

The reservoir is a container located at the back of your coffee machine.

The recuperator is located under the cup support.

A DeLonghi coffee maker is an excellent tool for any coffee lover. It offers the perfect balance of convenience, performance, and reliability, giving you the ability to make your favorite coffee drinks right in your kitchen. Over time, your DeLonghi coffee maker’s water tank and tray may need to be replaced due to wear and tear or because of mineral buildup that can affect the machine’s performance. This article will guide you through the process of changing the tank and water tray of a DeLonghi coffee maker.

How to Change the Tank and Water Tray of a DeLonghi Coffee Maker

Materials Needed:

  1. A new DeLonghi water tank and tray
  2. A clean, dry cloth
  3. A soft-bristled brush (optional)
  4. Soapy water (optional)


Step 1: Turn Off and Unplug the Machine

Before starting, ensure that the DeLonghi coffee maker is turned off and unplugged from the power source. This is a crucial safety measure to prevent any electrical shock.

Step 2: Remove the Old Water Tank

The water tank is usually located at the back of the DeLonghi coffee maker. Grasp the handle and gently pull the tank upwards to remove it from its housing. In some models, you might have to slide the tank outwards instead.

Step 3: Empty the Old Water Tray

The water tray or drip tray is typically situated at the base of the machine, under the coffee dispensing spout. Slide it out gently and empty any water or coffee remnants into the sink.

Step 4: Clean the Area

Once you’ve removed the old water tank and tray, it’s a good idea to clean the areas where they were located to ensure there’s no mineral buildup or residue. Use a clean, dry cloth to wipe the areas. If there’s stubborn residue, use a soft-bristled brush and some soapy water to gently scrub the area. After cleaning, make sure to thoroughly dry the area before inserting the new parts.

Step 5: Install the New Water Tank

Take your new DeLonghi water tank, and make sure it is clean and free of any packing material. Hold it by the handle, and insert it gently into its designated spot at the back of the machine. The tank should slide in easily and sit snugly in its place. Once it’s seated correctly, you can fill it with fresh, cold water up to the designated line.

How to Change the Tank and Water Tray of a DeLonghi Coffee Maker

Step 6: Install the New Water Tray

To install the new water tray, slide it gently into its designated slot at the base of the machine, under the coffee dispensing spout. Ensure that it is seated correctly and securely.

Step 7: Plug the Machine In and Turn It On

After successfully installing the new water tank and tray, you can plug in the coffee maker and turn it on. Check to ensure there are no leaks from the new tank or tray. Your DeLonghi coffee maker is now ready to brew your favorite coffee once again!


Replacing the water tank and tray of your DeLonghi coffee maker is a straightforward process that requires a few simple steps. Regular maintenance and occasional replacement of these parts will ensure that your coffee maker continues to provide excellent performance and delicious coffee for many years to come. So, enjoy your coffee-making experience with your refreshed DeLonghi coffee maker!