The pan is the metal container in which the food is placed to be fried. It is an indispensable part of the device.
It must be replaced if it is bent (following an impact for example), cracked or damaged. Handling is very simple since all you have to do is dismantle the tank and replace it.
This page shows how to replace a frypot on a SEB Actifry fryer, but the principle is the same on other models. Just be sure to buy a frypot that’s compatible with your fryer model and brand.
The tank is located in the internal surface of the device, just after its opening. It is a large metal container that must withstand the heat of frying.
The SEB ActiFry Fryer is a renowned kitchen appliance, best known for making healthy, oil-efficient meals. However, as with any appliance, parts like the oil tank may need replacement over time. If you’re facing such a situation, don’t fret. Here’s a comprehensive guide on how to change the tank in a SEB ActiFry Fryer:
Disclaimer: Always ensure the fryer is unplugged and cooled before starting any maintenance task. If you’re uncomfortable handling kitchen appliances, it’s advisable to seek professional help.
Part 1: Preparing the Fryer
Step 1: Cool Down and Unplug: Never attempt to replace the tank while the fryer is hot or plugged in. Let it cool down completely, then unplug it to prevent accidental burns or electrical shocks.
Step 2: Remove the Cooking Pan: Lift the lid of the fryer and pull out the cooking pan. This exposes the internal components, allowing you to access the tank.
Part 2: Removing the Old Tank
Step 3: Locate the Tank: The oil tank is usually located beneath or beside the cooking pan. Consult your user manual if you’re unsure of its location.
Step 4: Remove the Tank: Most SEB ActiFry Fryer models use a simple locking mechanism to secure the tank. To remove the tank, unlock this mechanism—this usually involves rotating or sliding a latch or clip. Once unlocked, carefully lift the tank out of the fryer.
Part 3: Installing the New Tank
Step 5: Prepare the New Tank: Before installing the new tank, make sure it’s clean and dry. This prevents any dirt or moisture from contaminating the oil.
Step 6: Position the New Tank: Place the new tank into the fryer, ensuring it’s positioned correctly as per your model’s instructions.
Step 7: Secure the Tank: Lock the tank into place using the same locking mechanism you unlocked earlier. The tank should be secure and stable, with no movement when gently jostled.
Part 4: Reassembling the Fryer
Step 8: Reinstall the Cooking Pan: Place the cooking pan back into the fryer. Ensure it’s seated correctly and securely over the new tank.
Step 9: Test the Fryer: Plug the fryer back in and add a small amount of oil to the new tank. Switch the fryer on and let it run for a few minutes to ensure everything is working as expected.
Conclusion
Changing the tank in a SEB ActiFry Fryer is a straightforward task that can significantly improve the device’s performance. Regular maintenance, such as tank replacement, ensures your fryer continues to provide healthier, tastier meals. Always refer to your specific model’s user manual for guidance and never hesitate to seek professional assistance if required. With the right care, your ActiFry Fryer will continue serving you well for many years to come.
