How to Drain / Empty the Water from a Washing Machine

The drain pump allows the evacuation of waste water from the washing machine tub. It is made up of several elements: a motor, a pump body, a propeller and a filter cap.
When filling the washing machine, the pump body fills with water. Even if the drum is emptied, there will still be water in the drain pump.

You probably have a drain pump failure if your washing machine is full of water or if it suddenly stopped mid-wash with the door stuck.

The drain pump is located on the front of the washing machine, at the bottom.

Occasionally, you may need to drain or empty the water from your washing machine. This could be due to various reasons, such as cleaning the machine, relocating it, or resolving a drainage issue. Whatever the case may be, knowing how to drain the water properly is important to prevent any spills or damage. In this article, we will guide you through the steps to drain or empty the water from a washing machine.

1. Safety Precautions

Before starting the process of draining the water, it is essential to ensure your safety:

• Unplug the washing machine from the power outlet to avoid any electrical accidents.
• If you have a top-loading machine, lift the lid or open the door and keep it open during the entire process.
• If you have a front-loading machine, locate the emergency drain hose access or filter access door. Refer to the machine’s manual for the specific location.
• Keep a bucket or large container nearby to collect the water.

2. Manual Draining for Top-Loading Machines

If your washing machine is a top-loading model, follow these steps to drain the water manually:

1. Locate the drainage hose: Look for a flexible drainage hose near the back of the machine. It is usually positioned at the bottom or on the side.
2. Position the hose: Place the end of the hose into a nearby sink or a large bucket. Make sure it is securely positioned to prevent any water from spilling.
3. Gravity drainage: In most cases, the water will drain automatically by gravity once the hose is positioned correctly. You may need to lift or tilt the hose slightly to initiate the flow of water.
4. Monitor the drainage: Keep an eye on the water level in the sink or bucket. Once the water stops flowing, you have successfully drained the machine.

3. Using the Emergency Drain Hose or Filter Access for Front-Loading Machines

For front-loading washing machines, the drainage process may involve using the emergency drain hose or accessing the filter. Follow these steps:

1. Locate the emergency drain hose or filter access door: Consult your washing machine’s manual to identify the specific location of the emergency drain hose or filter access door.
2. Position the hose or open the door: Place a bucket or container below the emergency drain hose or filter access door to collect the water. If you are using the hose, unplug it from its holder and lower it toward the bucket or container. If you are using the filter access door, open it slowly and allow the water to flow into the container.
3. Allow the water to drain: Let the water flow until the drum is empty. You may need to periodically empty the bucket or container as it fills up.
4. Close the access door or reattach the hose: Once the water has drained completely, close the access door securely or reattach the emergency drain hose.

4. Resolving Drainage Issues

If your washing machine is not draining properly during regular cycles, there may be an issue with the drainage system. In such cases, it is recommended to:

• Check for any clogs or blockages in the drainage hose or filter. Clear them out if necessary.
• Ensure that the drainage hose is not kinked or bent, as this can restrict the flow of water.
• Inspect the drain pump for any obstructions or debris. Clean or replace the pump if needed.
• If the drainage problem persists, it is advisable to consult a professional technician for further assistance.

Remember to always consult your washing machine’s manual for specific instructions related to draining the water. Each machine may have unique features and requirements.

By following these steps, you can safely drain or empty the water from your washing machine. Taking proper precautions and addressing drainage issues promptly will help maintain the performance and longevity of your appliance.

“If you’re in Toronto and urgently need washing machine repairs, reach out to Shymon Appliance Repair Service.”