The platter driver is the part that connects the glass platter to the motor and allows the dish to rotate.
This part can be broken or deformed, so it could not wedge under the glass top to drag it.
The trainer intervenes for a breakdown related to the rotation of the plate.
The tray carrier is located in the cavity of the microwave, under the tray.
Microwave ovens have become an integral part of our kitchens, known for their convenience and speed in cooking and reheating food. One essential component of a microwave is the tray turner, also known as the turntable or carousel. The tray turner rotates when the microwave is operating, helping to cook the food evenly by spreading the microwaves all around the food. Over time, the tray turner may wear out, stop rotating, or get damaged, impacting the efficiency of the microwave. This article will guide you through the process of replacing a microwave tray turner.
Disclaimer
Replacing a microwave tray turner is a simple task, but you should always prioritize safety when dealing with electronic appliances. If your microwave is still under warranty, it’s better to have replacements or repairs done by a professional service center to avoid voiding the warranty.
Tools You Will Need:
- A new microwave tray turner or turntable
Step-by-Step Procedure
1. Unplug the Microwave
As always, the first step when doing any kind of work on an electrical appliance is to unplug it. This eliminates the risk of electrical shock.
2. Open the Microwave Door and Remove the Old Tray Turner
Open the microwave door and carefully lift the glass tray off the turner. If the turner is a roller guide, you can easily lift it up and out of the microwave. If it’s a motor-driven turntable, you might need to turn and lift it gently to detach it from the motor.
3. Inspect the Tray Turner
Check the old tray turner for any obvious signs of damage. Sometimes, cleaning the wheels or the track on a roller guide can fix the issue. If the tray turner is visibly damaged or still doesn’t work after cleaning, it’s time to replace it.
4. Purchase a New Tray Turner
When purchasing a new tray turner, make sure it’s compatible with your microwave model. You can typically find this information in your microwave’s user manual or by searching your microwave model online.
5. Install the New Tray Turner
To install the new tray turner, simply place it in the center of the microwave where the old one was located. If it’s a motor-driven turntable, make sure it’s properly connected to the motor. Place the glass tray back onto the new tray turner.
6. Test the New Tray Turner
Plug the microwave back in and test the new tray turner to ensure it rotates properly. Try heating a mug of water or something similar to see if the rotation is smooth and the heating is even.
By maintaining and replacing your microwave’s tray turner when necessary, you can ensure that your microwave heats food evenly and operates at peak efficiency. If you encounter any difficulties or are unsure about any steps, don’t hesitate to contact a professional for help.
