How to Replace the Drum Blade of a Washing Machine

Jul 10, 2023, 15:54pm

The drum paddle ensures that your laundry is cleaned properly. They stir the laundry mechanically so that the water penetrates all the fabrics.

The drum vane should be replaced if:

  • Your laundry is dirty even after washing, or it is poorly washed,
  • Your washing machine no longer rinses,
  • Your washing machine gives off a bad smell.

Drum paddles sit inside the drum of a top-loading washing machine. The drum is the tub where the laundry ends up during a wash.

The drum blade, also known as the agitator or paddles, is a crucial component in a washing machine that helps to agitate and move the clothes during the wash cycle. Over time, the drum blade can wear out, become damaged, or even break, affecting the washing machine’s performance. If you notice that the drum blade is not functioning properly or has broken, it may be necessary to replace it. While replacing the drum blade requires some mechanical skill, it can be done with the right tools and careful attention. In this guide, we will walk you through the steps to replace the drum blade of a washing machine.

How to Replace the Drum Blade of a Washing Machine

Safety Precautions

Before starting any repair work on your washing machine, it is important to prioritize safety. Always unplug the machine from the power source before attempting any repairs. Additionally, ensure you are working in a well-lit area and wear protective gloves to prevent injury.

Tools Required

To replace the drum blade of a washing machine, you will need the following tools:

  • Screwdriver set (Phillips or Torx, depending on your machine)
  • Adjustable wrench or pliers
  • Towels or rags (to protect the floor and clean up any spills)

Steps to Replace the Drum Blade

Follow these steps to replace the drum blade of a washing machine:

Step 1: Unplug the Washing Machine

Ensure the washing machine is disconnected from the power source by unplugging it from the wall socket.

Step 2: Access the Drum Blade

To access the drum blade, remove the agitator or any components that cover it. Depending on the model of your washing machine, this may involve removing a cap or lid on top of the agitator or unscrewing screws that secure it in place. Consult your washing machine’s user manual or search online for specific information about accessing the drum blade in your particular model.

Step 3: Remove the Old Drum Blade

Once you have access to the drum blade, carefully lift it out of the washing machine. In some cases, the drum blade may be secured with screws or clips. Use a screwdriver or pliers to remove these fasteners, allowing you to remove the old drum blade.

Step 4: Clean the Drum

With the old drum blade removed, take the opportunity to clean the drum and remove any accumulated dirt, lint, or debris. Use a damp cloth or sponge to wipe down the inside of the drum thoroughly.

Step 5: Install the New Drum Blade

Take the new drum blade and align it properly in the drum. Ensure it fits securely and is positioned correctly. If necessary, refer to the old drum blade or consult the user manual for guidance on the correct orientation.

Step 6: Secure the Drum Blade

If the new drum blade requires screws or clips to secure it in place, use the appropriate screwdriver or pliers to attach them. Ensure the drum blade is held firmly in place.

Step 7: Reassemble the Washing Machine

Once you have completed the drum blade replacement, reassemble any components you removed earlier, such as the agitator or any covers. Use the appropriate screws or fasteners to secure these components back in place.

How to Replace the Drum Blade of a Washing Machine

Step 8: Test the Machine

Plug your washing machine back into the power source. Turn it on and run a test cycle. Observe the operation of the new drum blade, ensuring it agitates the clothes properly and there are no unusual noises or issues. If the machine operates correctly without any problems, it indicates that the new drum blade is properly installed.

If you encounter any persistent problems or suspect a fault with the drum blade despite the replacement, it is recommended to consult a professional appliance repair technician or contact the manufacturer for further assistance.

In conclusion, replacing the drum blade of a washing machine is a task that requires some mechanical skill and attention to detail. By following these steps and using the appropriate tools, you can successfully replace a damaged or worn-out drum blade and restore the performance of your washing machine. Always refer to your washing machine’s user manual for specific instructions and guidelines, as different models may have slight variations in the drum blade replacement process. Regular maintenance and prompt drum blade replacement will help ensure the optimal functioning of your washing machine.


“If you’re in Toronto and urgently need repair of washing machines Toronto, reach out to Shymon Appliance Repair Service.”