Fault codes, also called error codes or fault codes, allow your device to automatically report an internal malfunction. Below you will find the list of fault codes for your LG washing machine and their meaning: this will give you an indication to best diagnose the origin of the malfunction of your appliance.
The error code can be read directly on the front panel of your LG washing machine. Depending on the model, you can read this code on a display (for example, “Err 01”) or by observing the number of LED flashes (for example: 4 LED flashes = “Err 04”).
Refer to the user manual for your LG appliance to find out the exact meaning of the fault code displayed or the lights that flash. The number of flashes often corresponds to the error code number, but there are specificities linked to each model and brand.
IE ERROR CODE – WATER LEVEL
This fault code indicates that the water level in your washing machine has not been reached. You must check the following points: the water inlet, the compression chamber, as well as the pressure switch.
Finally, the problem may come from the card or electronic board.
ERROR CODE OE OR DE – EMPTY WATER
This fault code indicates that the household appliance does not detect the water vacuum. Your washing machine is not draining properly.
You must check the following elements: drain circuit, pump, compression chamber, pressure switch and plate, otherwise blame the electronics. Then manually empty your machine.
ERROR CODE FE – LEAK
This error code indicates a leak in your washing machine. The following elements must be checked: compression chamber, pressure switch. Finally, check and replace the plate if necessary.
PE ERROR CODE – LEAK
This error code indicates a leak in your washing machine. You must then check the following elements: compression chamber, pressure detector. Finally, check and replace the card if necessary.
ERROR CODE DE – LOCK
This fault code corresponds to a problem with the closing or locking of the appliance door. Check the good condition of the following elements: door closure, door lock. Once the door is closed, the message will disappear.
If, despite everything, this error code is still displayed, this is a problem with the security of the door. Finally, check and replace the plate if necessary.
EU ERROR CODE – CLOTHING
This error code indicates that the clothes are incorrectly positioned in the drum or bin. This may be due to poor distribution of laundry in the bin which caused dangerous movement for the machine.
You must then restart the spin cycle or remove clothes from the drum.
ERROR CODE TE – HEATING
This code indicates a problem with the heater. This also indicates that the temperature probe is no longer working
ERROR CODE SE – TACHOMETER
This error code corresponds to a tachometer problem on your washing machine.
You must check the following elements: tachometer (located at the engine base), wiring. Finally, check and replace the card if necessary.
CE ERROR CODE – ENGINE
This error code indicates a malfunction with the engine.
- Check its condition and that it is not short-circuited. A short circuit can cause a significant safety concern.
- Finally, check and replace if necessary the card and wiring. For this type of manipulation, unplug the device.
ERROR CODE LE – MOTOR
This code indicates a problem with the machine’s motor.
- You must check these elements: the windings, the connector, the wiring.
- Finally, check and replace the plate if necessary.
ERROR CODE BE – ELECTRONIC BOARD
This error code means that the tank movement detection system is faulty. You need to change the part.
ERROR CODE EE – ELECTRONIC BOARD MEMORY
This error code indicates a problem with the electronic board memory: replace the part.
ERROR CODE PF – POWER SUPPLY
This fault code indicates a power supply problem. Unplug and plug in the machine again. Then restart a wash or spin cycle.
ERROR CODE AE ​​OR DHE – DRYING CYCLE
This code indicates a heating problem during a drying cycle. Check the good condition of the following elements: the resistance, the probe, the safety thermostat and the hot air circuit.
dE: Door Lock Error
The washing machine is having difficulty locking or unlocking the door, preventing the cycle from starting or completing.
LE1: Motor Error
There’s an issue with the washing machine’s motor, which may affect its ability to agitate or spin.
LE2: Hall Sensor Error
The hall sensor, which detects the motor’s RPM, is malfunctioning or not providing accurate readings.
PF: Power Failure
The washing machine experienced a power failure during the cycle, which could be due to external power issues or internal electrical malfunctions.
CE1: Communication Error
There’s a communication problem between the washing machine’s control board and other components, impacting its operation.
CE2: Overcurrent Error
The washing machine has detected an overcurrent issue, potentially due to a problem with the motor or electrical components.
FE1: Water Overflow Error
There’s an issue with water overflowing, usually due to a problem with the water inlet valve or sensor.
FE2: Water Inlet Valve Error
The washing machine is having trouble with the water inlet valve, potentially causing water supply issues.
PE1: Pressure Sensor Error
The pressure sensor, responsible for determining water levels, is malfunctioning.
PE2: Water Drain Error
The washing machine is having trouble draining water, potentially due to a clog in the drain hose or pump.
FE3: Water Overflow Error
This error indicates a water overflow issue, which can be caused by a problem with the water inlet valve or water level sensor.
AE: Water Leakage Error
The washing machine has detected water leakage, potentially from damaged hoses or connections.
HE: Heater Error
There’s a problem with the washing machine’s heater, which may affect its ability to heat water for washing.
CE3: Communication Error
There’s a communication problem between the washing machine’s control board and other components, impacting its operation.
PF3: Power Failure
The washing machine experienced a power failure during the cycle, which could be due to external power issues or internal electrical malfunctions.
dE1: Door Lock Error
The washing machine is having difficulty locking or unlocking the door, preventing the cycle from starting or completing.
dE2: Door Lock Error
Another variation of the door lock error, indicating issues with the door lock mechanism.
UE1: Unbalanced Load
The load inside the washing machine is unevenly distributed, causing imbalance during the spin cycle.
UE2: Unbalanced Load
Another variation of the unbalanced load error, indicating issues with load distribution.
OE1: Drain Error
The washing machine is having trouble draining water, potentially due to a clog in the drain hose or pump.
OE2: Drain Error
Another variation of the drain error, indicating issues with the drainage system.
LE3: Motor Error
There’s an issue with the washing machine’s motor, which may affect its ability to agitate or spin.
LE4: Hall Sensor Error
The hall sensor, which detects the motor’s RPM, is malfunctioning or not providing accurate readings.
CE4: Communication Error
There’s a communication problem between the washing machine’s control board and other components, impacting its operation.
FE4: Water Overflow Error
This error indicates a water overflow issue, which can be caused by a problem with the water inlet valve or water level sensor.
PE3: Pressure Sensor Error
The pressure sensor, responsible for determining water levels, is malfunctioning.
PE4: Water Drain Error
The washing machine is having trouble draining water, potentially due to a clog in the drain hose or pump.
HE2: Heater Error
There’s a problem with the washing machine’s heater, which may affect its ability to heat water for washing.
SE: Over-Sudsing Error
The washing machine has detected an excess of suds in the drum, which can disrupt the wash cycle.
DE1: Door Lock Error
The washing machine is having difficulty locking or unlocking the door, preventing the cycle from starting or completing.
DE2: Door Lock Error
Another variation of the door lock error, indicating issues with the door lock mechanism.
FE5: Water Overflow Error
This error indicates a water overflow issue, which can be caused by a problem with the water inlet valve or water level sensor.
