Fault codes, also called error codes or fault codes, allow your device to automatically report an internal malfunction. Below you will find the list of fault codes for your Samsung tumble dryer and their meaning: this will give you an indication to best diagnose the origin of the malfunction of your appliance.
The error code can be read directly on the front panel of your Samsung dryer. Depending on the model, you can read this code on a display (for example, “Err 01”) or by observing the number of LED flashes (for example: 4 LED flashes = “Err 04”).
Refer to the instructions for your Samsung dryer to find out the exact meaning of the fault code displayed or the lights that flash. The number of flashes often corresponds to the error code number, but there are specificities linked to each model and brand.
AE ERROR CODE – COMMUNICATION ERROR
This code signals a communication error between the different modules and electronic cards.
Check the connections between the electronic control card (display) and the power module.
ERROR CODE BE / BE2 – KEYS BLOCKED
This fault code is displayed when one or more keys are blocked.
- If the device has physical buttons, try moving them to unlock them.
- If the problem persists, or it is touch keys, replace the control board.
ERROR CODE DE – DOOR OPEN
This error code is displayed when the door is open while a program is running.
- Close the door and restart the device.
- If the problem persists, check the door safety and replace it if defective.
ERROR CODE AND – ELECTRONIC CARD
This fault code indicates a programming and EEPROM memory fault.
Replace the power board to resolve the error.
ERROR CODE HE / HC – COMPRESSOR OVERHEATING
This fault code indicates overheating of the compressor or heat pump.
- Remove and clean filters that could cause overheating by blocking the air passage.
- Check the resistance of the compressor temperature sensor and the fan.
ERROR CODE TE / TE4 / TE5 / TEX – TEMPERATURE PROBE
This type of error code, starting with tE, concerns a problem with the temperature probe.
Check the connections of the NTC temperature probes, clean them and replace them if necessary.
ERROR CODE 2E – SUPPLY VOLTAGE
This fault code indicates that the input power voltage to the dryer is incorrect (too low or too high).
- Check the voltage delivered by the mains socket. If it is not around 230 volts, have your electrical installation checked by a professional.
- Otherwise, check the power cable and the connections on the electronic board.
ERROR CODE 3E – DRUM ROTATION
This fault code indicates that the drum cannot rotate correctly.
- Observe the door seals to see if anything is blocked and preventing the drum from rotating.
- Check the wiring between the motor and the electronic board.
ERROR CODE 5E – DRAIN FAULT
This code indicates that an overflow has been detected several times in a row.
- Empty the condensed water tank and check for a leak.
- Otherwise, check the drain pump, which must be replaced if defective, and the float (overflow detector).
HE: Heating Element Error
The dryer has detected an issue with the heating element, which may affect its ability to generate heat for drying clothes.
TE: Thermistor Error
There’s a problem with the thermistor, which measures the temperature inside the dryer. This can impact temperature control during drying cycles.
DE: Door Error
The dryer door is not securely closed or not recognized as closed, preventing the cycle from starting.
FE: Exhaust Filter Error
The exhaust filter in the dryer is clogged or needs cleaning, potentially affecting airflow and drying efficiency.
dE: Door Lock Error
The dryer door is not securely locked or not recognized as locked, preventing the cycle from starting.
HE2: Heating Element Error
Another variation of the heating element error, indicating issues with the heating element’s function.
TE2: Thermistor Error
Another variation of the thermistor error, signifying issues with the thermistor’s function.
CE: Communication Error
There’s a communication problem between various components of the dryer, impacting its operation.
FE2: Exhaust Filter Error
Another variation of the exhaust filter error, indicating that the exhaust filter requires cleaning or replacement.
dC: Door Open Error
The dryer door is detected as open during operation, causing the cycle to pause or not start.
SE: Overheating Error
The dryer has detected that the temperature inside the drum is too high, which may be caused by restricted airflow or a malfunctioning thermostat.
LE: Motor Error
There’s a problem with the dryer’s motor, which may affect its ability to tumble clothes during drying cycles.
UE: Drum Unbalance Error
The load inside the dryer is unevenly distributed, causing imbalance during the spin cycle.
dO: Drying Rack Error
The drying rack is detected as installed when it should not be, or it’s not recognized when it should be in use.
bE: Button Error
There’s an issue with the dryer’s control panel buttons, potentially impacting the selection of drying options.
HE3: Heating Element Error
Another variation of the heating element error, indicating issues with the heating element’s function.
TE3: Thermistor Error
Another variation of the thermistor error, signifying issues with the thermistor’s function.
CE3: Communication Error
Another variation of the communication error, indicating a problem with communication between dryer components.
bE2: Button Error
Another variation of the button error, indicating issues with the control panel buttons.
SE2: Overheating Error
Another variation of the overheating error, indicating that the temperature inside the dryer drum is too high.
OE: Outlet Error
The dryer’s exhaust outlet is blocked or restricted, which can lead to poor airflow and affect drying efficiency.
dO2: Drying Rack Error
Another variation of the drying rack error, indicating a problem with the detection of the drying rack.
tS: Temperature Sensor Error
There’s an issue with one of the temperature sensors in the dryer, affecting temperature control during drying cycles.
dE3: Door Lock Error
Another variation of the door lock error, indicating issues with the door lock mechanism.
HE4: Heating Element Error
Another variation of the heating element error, signifying issues with the heating element’s function.
TE4: Thermistor Error
Another variation of the thermistor error, indicating issues with the thermistor’s function.
CE4: Communication Error
Another variation of the communication error, indicating ongoing problems with communication between dryer components.
bE3: Button Error
Another variation of the button error, indicating ongoing issues with the control panel buttons.
tO: Cool Down Error
The dryer has detected an issue with the cool-down process, which is the final stage of the drying cycle.
Et: Dry Time Error
There’s an error related to the estimated drying time, which can affect cycle completion.
Ut: Drum Unbalance Error
Another variation of the drum unbalance error, indicating that the load inside the dryer is unevenly distributed.
Et2: Dry Time Error
Another variation of the dry time error, indicating ongoing issues with the estimated drying time.
bE4: Button Error
Another variation of the button error, indicating ongoing problems with the control panel buttons.
tS2: Temperature Sensor Error
Another variation of the temperature sensor error, indicating ongoing issues with one of the temperature sensors.
SE3: Overheating Error
Another variation of the overheating error, signifying ongoing issues with the temperature inside the dryer drum.
OE2: Outlet Error
Another variation of the outlet error, indicating ongoing problems with the exhaust outlet’s airflow.
tE: Temperature Error
There’s an error related to the temperature control system in the dryer, affecting temperature accuracy during cycles.
FE3: Exhaust Filter Error
Another variation of the exhaust filter error, indicating ongoing issues with the exhaust filter’s cleanliness.
dE4: Door Lock Error
Another variation of the door lock error, signifying ongoing issues with the door lock mechanism.
HE5: Heating Element Error
Another variation of the heating element error, indicating ongoing issues with the heating element’s function.
TE5: Thermistor Error
Another variation of the thermistor error, suggesting ongoing issues with the thermistor’s function.
CE5: Communication Error
Another variation of the communication error, indicating persistent problems with communication between dryer components.
bE5: Button Error
Another variation of the button error, suggesting ongoing issues with the control panel buttons.
tO2: Cool Down Error
Another variation of the cool-down error, indicating ongoing issues with the final stage of the drying cycle.
Et3: Dry Time Error
Another variation of the dry time error, suggesting ongoing issues with the estimated drying time.
Ut2: Drum Unbalance Error
Another variation of the drum unbalance error, indicating ongoing problems with unevenly distributed loads.
tS3: Temperature Sensor Error
Another variation of the temperature sensor error, suggesting ongoing issues with one of the temperature sensors.
SE4: Overheating Error
Another variation of the overheating error, signifying ongoing issues with the temperature inside the dryer drum.
OE3: Outlet Error
Another variation of the outlet error, indicating ongoing problems with airflow through the exhaust outlet.
tE2: Temperature Error
Another variation of the temperature error, suggesting ongoing issues with the temperature control system.
FE4: Exhaust Filter Error
Another variation of the exhaust filter error, indicating persistent problems with the exhaust filter’s cleanliness.
dE5: Door Lock Error
Another variation of the door lock error, suggesting ongoing issues with the door lock mechanism.
HE6: Heating Element Error
Another variation of the heating element error, indicating ongoing issues with the heating element’s function.
TE6: Thermistor Error
Another variation of the thermistor error, suggesting ongoing issues with the thermistor’s function.
CE6: Communication Error
Another variation of the communication error, indicating persistent problems with communication between dryer components.
bE6: Button Error
Another variation of the button error, signifying ongoing issues with the control panel buttons.
