Each washing machine model is equipped with a display system to detect the fault code linked to the malfunction it is experiencing. Also called error code or fault code, you will find below the list of codes for your Siemens washing machine with their meaning . You will thus be able to recognize the error code associated with any incident occurring on your Siemens washing machine.
The code corresponding to the fault can be found directly on the front panel of your Siemens washing machine., if equipped. The display mode depends on your device model. For example, an βErr 01β code may be indicated there, but you may also observe lights flashing (the βErr 01β code here will correspond to 1 light flash).
In order to detect the breakdown of your Siemens washing machine, you can consult the instructions for use. You will find the correspondences between the flashing lights and the associated error codes, depending on the characteristics of each brand and each model.
ERROR CODE D02 – DRAIN
The fault code may be displayed if there is a problem during draining.
- Empty the water present in the drain pump.
- Clean the inside of the pump.
- If the problem persists, clean the water drain pipe, which may be clogged.
TROUBLE CODE D07 – MOTOR
This code indicates that the motor is defective.Β Check the condition of the motor brushes and replace them if they are worn.
ERROR CODE E02 / F02 – HEATING
This fault code is displayed on your device when the desired temperature is not reached.
Check your resistance and the temperature probe.Β If the problem persists, replace the electronic card.
ERROR CODE E13 – TEMPERATURE
This code indicates a failure in one of the parts regulating the water temperature, which may be too heated.Β Check:
- The electronic card
- Heating and drying resistance
ERROR CODE E16 / F16 – CLOSING
This trouble code indicates that the washing machine cannot start due to a door lock problem.
Check that nothing is blocking the door from closing.
ERROR CODE E17 / F17 – WATER SUPPLY
This fault code indicates that the water supply to the washing machine is too low.
- Check the opening of the supply valve at the back of the washing machine.
- Clean the water inlet filter, in case it is clogged.
- Also check the solenoid valve
ERROR CODE E18 / F18 – EVACUATION
The E18 or F18 fault code may be displayed if there is a problem with the drain pump.
- Empty the water present in the drain pump.
- Clean the inside of the pump.
- If the problem persists, clean the water drain pipe, which may be clogged.
ERROR CODE E19 / F19 – TEMPERATURE
This fault code is displayed on your device when the desired temperature is not reached.
Check your resistance and the temperature probe.
ERROR CODE E20 / F20 – UNEXPECTED HEATING
This code indicates a problem during heating.
Turn off your washing machine and reset it if the problem persists.
ERROR CODE E21 / F21 – LOW ROTATION SPEED
The error code may be displayed if the drum or motor freezes for a few seconds and then resumes.Β Try spinning the drum by hand:
- If it does not rotate freely, check that no clothing or other object is blocking the rotation of this part.
- If it turns, check the motor system (coals, motor, belt).
ERROR CODE E23 / F23 – LEAK
The E23 or F23 code is displayed when a leak is detected in the device.Β Check the tightness and good condition of the following parts:
- Drain cap and filter seal
- Product box seal
- Tank/porthole seal
- Water inlet/discharge hoses
ERROR CODE E25 / F25 – TURBIDITY SENSOR
The error code E25 or F25 indicates a turbidity sensor failure.
ERROR CODE E26 / F26 – PRESSURE SENSOR
This code indicates that the device’s analog pressure sensor is defective.
ERROR CODE E27 / F27 – PRESSURE
This code is displayed when a pressure problem is detected in the device.Β The problem is usually caused by a lack of water.
Check that the supply valve is fully open and that there are no blockages, kinks or leaks in the water inlet hose.
TROUBLE CODE E28/F28 – FLOW SENSOR
This fault code indicates that the washing machine’s flow sensor is defective.
ERROR CODE E29 / F29 – LOW WATER PRESSURE
The code E29 or F29 is displayed when the water pressure in the device is too low.
- Check the water supply directly to the tap by running the water into a bucket and checking that it drains correctly.
- Clean the water inlet filters.
ERROR CODE E31 – OVERFLOW
The E31 code indicates an overflow, caused by a defective part:
- The pump or hose is clogged
- The solenoid valve plug is stuck
- The autocalibration of the analog pressure switch is incorrect
- The pressure switch is blocked
- A hose is clogged
ERROR CODE E32 / F32 – UNBALANCE DETECTION
This error code displays when the weight in the drum is unevenly distributed.Β Spinning does not take place or takes place more slowly.
- Wash large and small items of laundry together to reduce unbalance.
- Close the buttons and zippers of the pillowcases and duvets.
ERROR CODE E33 / F33 – FOAM
This fault code indicates that foam has been detected.Β Foam may come out of the detergent drawer when washing lightly soiled laundry or curtains, in the event of an overdose or use of an unsuitable or old detergent.
- Reduce the dosage of detergent, especially when using water with low hardness when washing lightly soiled laundry.
- For information on dosage, consult the detergent product packaging.
ERROR E34 / F34 – DOOR OPEN
This code indicates a problem closing the door.
- Close the door correctly.Β When fully loaded, the door may not be properly closed.
- Also check if a piece of laundry is stuck between the door and the frame.
- Restart the program.
ERROR CODE E35 – DOOR BLOCKED
This code is caused by a door lock problem.Β The door of your device is blocked and will not open.
Check the locking system, and the condition of the door and its hinges.
ERROR CODE E36 – DEFECTIVE LOCKING
The E36 error code indicates a problem with the door locking system.
ERROR CODE E37 – NTC PROBE
This code indicates that the NTC probe is defective.
ERROR CODE E38 – TEMPERATURE PROBE SHORT CIRCUIT
This code is displayed when the NTC probe is short-circuited and therefore defective.
ERROR CODE E40 – INCORRECT VOLTAGE
This code indicates a voltage problem.Β The washing program may be interrupted.
Check the condition of the appliance’s power cord or have your electrical installation checked.
ERROR CODE E42 – MOTOR
This code indicates an engine problem.
Check the motor connections (burns, cut wires) and motor brushes.
ERROR CODE E43 – MOTOR ROTATION
The E43 fault code is displayed when the motor has a rotation problem.Β Several causes are possible:
- Faulty tachometer
- Drum blocked by laundry
- Motor blocked
- Control fault
- Defective triac
ERROR CODE E44 – CHANGE OF DIRECTION OF ROTATION
The fault code indicates a problem when changing the direction of rotation of the drum.
ERROR CODE E47, E48, E49, E50, E51, E52 – DRUM BLOCKED
The error code may be displayed if the drum or motor freezes for a few seconds and then resumes.Β Try spinning the drum by hand:
- If it does not rotate freely, check that no clothing or other object is blocking the rotation of this part.
- If it turns, check the motor system (coals, motor, belt).
ERROR CODE E56 – STOP
This code is displayed when the washing machine runs normally and then stops after a few minutes.
Contact a technician to resolve this specific issue.
ERROR CODE E57 – COMMUNICATION ERROR
This code indicates that the electronic card has a problem, and that it is not communicating with the other parts of the device.
Replace your electronic board to resolve the problem.
ERROR CODE E59 – TEMPERATURE PROBE
This code indicates a temperature sensor failure.
ERROR CODE E59 – REDUCED ROTATION SPEED
This error code indicates a failure during the spinning phase.Β The rotation speed of the drum at this time is quite low.
- Check the spin mode programming.
- Check that the hoses and filters are not blocked.
- Check the motor system.
ERROR CODE E60 – FLOW
This code indicates a problem in the inlet water flow measurement.
- Check the tap opening and that the pipes are not blocked/kinked.
- The flow meter may also be defective.
ERROR CODE E61 – DOOR SECURITY
This code indicates that the door safety has a problem.
- Clear the error by turning the device off and on again.
- Check door security.
- Check the mechanical system.
- Check the locking system wiring.
ERROR CODE E63 – SYSTEM ERROR
This code indicates an error in the communication system between the electrical panels.
Replace your defective electronic card if you spot poor connections or signs of wear.
ERROR CODE E67 – PROGRAMMING ERROR
This code indicates an error in the electronic cards.
Replace your defective electronic card.
ERROR CODE E71, E72 – DRUM BLOCKED
The error code may be displayed if the drum or motor freezes for a few seconds and then resumes.Β Try spinning the drum by hand:
- If it does not rotate freely, check that no clothing or other object is blocking the rotation of this part.
- If it turns, check the motor system (coals, motor, belt).
ERROR CODE E75 – ENGINE PROBLEM
This code indicates a motor failure when the program ends, but the motor is not running at normal speed (too low).
Check that nothing is blocking the rotation of the drum (laundry, object) or check the motor.
ERROR CODE E77 – MOTOR BLOCKED
The error code may be displayed if the drum or motor is not rotating at all.Β Rotate the drum by hand:
- If it does not rotate freely, check that no clothing or other object is blocking the rotation of this part.
- If it turns, check the motor system (coals, motor, belt).
ERROR E80 – DRIVE FAULT
This error code is displayed when a fault is detected in the drive circuit module.
Check the motor brushes, motor and drive belt.
ERROR CODE E82 – DRUM BLOCKED
The error code may be displayed if the drum or motor freezes for a few seconds and then resumes.Β Try spinning the drum by hand:
- If it does not rotate freely, check that no clothing or other object is blocking the rotation of this part.
- If it turns, check the motor system (coals, motor, belt).
ERROR CODE E83 – PRESSURE SENSOR
This code indicates that the device’s analog pressure sensor is defective.
Replace it to solve your problem
ERROR CODE E92 – REDUCED ROTATION SPEED
This error code indicates a failure during the spinning phase.Β The rotation speed of the drum at this time is quite low.
- Check the spin mode programming.
- Check that the hoses and filters are not blocked.
- Check the motor system.
ERROR CODE E93 – COLD WATER
This fault code is displayed on your device when the desired temperature is not reached and the water is cold.
Check your resistance and the temperature probe.
ERROR CODE E1010 – DOSING MODULE
This code indicates a fault in the automatic detergent dispensing module.
Replace it to solve your problem.
ERROR CODE F01
This fault code indicates that the water supply to the washing machine is too low.
- Check the opening of the supply valve at the back of the washing machine.
- Clean the water inlet filter, in case it is clogged.
ERROR CODE F08 – TEMPERATURE
This fault code is displayed on your device when the desired temperature is not reached.
- Check your resistance and the temperature probe.
- If the problem persists, replace your electronic card.
βKEYβ ERROR CODE
The key light is on and the wash does not start.
- Deactivate the child lock and check that the door is securely closed.
- Check the power outlet.
- Check the door lock system.
βKEYβ ERROR CODE AFTER STARTUP
This fault code is displayed on your device when the desired temperature is not reached.
Check your resistance and the temperature probe.
E100 or F100: Firmware mismatch
The installed firmware version is not compatible with the machine’s hardware.
E101 or F101: Humidity sensor error
For combo washer-dryers, the humidity sensor is malfunctioning or providing irregular readings.
E102 or F102: Program storage error
The machine encounters issues storing custom wash programs.
E103 or F103: Water temperature consistency error
The water temperature during a cycle fluctuates beyond the acceptable range.
E104 or F104: High internal memory usage
The machine’s internal memory is almost full or being excessively used.
E105 or F105: Steam valve error
For machines with a steam function, the steam valve is malfunctioning.
E106 or F106: Water recirculation pump error
The pump responsible for recirculating water during specific cycles is malfunctioning.
E107 or F107: Vibration sensor error
The sensor designed to detect and report excessive vibrations is malfunctioning.
E108 or F108: Load redistribution error
The machine is having issues redistributing the laundry load during spin cycles.
E109 or F109: Backup battery fault
If the machine has a backup battery for settings or memory, it’s malfunctioning.
E110 or F110: Motor speed error
The motor is not achieving the required speed or is deviating from set speeds.
E111 or F111: Wireless connectivity error
If the machine offers wireless connectivity features, there’s an issue with it.
E112 or F112: Error saving settings
The machine is unable to save user preferences or settings changes.
E113 or F113: Anti-crease function error
The system designed for the anti-crease function is malfunctioning.
E114 or F114: Load detection calibration error
The machine’s calibration for load detection is off or couldn’t be set.
E115 or F115: Control panel lock error
The machine’s control panel lock feature, if available, is malfunctioning.
E116 or F116: Water quality sensor error
For machines with water quality detection, the sensor is malfunctioning.
E117 or F117: Internal communication timeout
Different components of the machine have stopped communicating for an extended period.
E118 or F118: Cycle phase progression error
The machine is unable to progress from one phase of a cycle to the next.
E119 or F119: Tub cleaning function error
If the machine offers a tub cleaning function, there’s an error with this feature.
E120 or F120: Machine self-test failure
The machine’s internal self-test did not pass or encountered an error.
E121 or F121: Residual water sensor error
The machine’s sensor, which detects residual water after draining, is malfunctioning.
E122 or F122: Lid switch fault
The top lid switch, especially for top-loading machines, is not functioning properly.
E123 or F123: Internal light error
If the machine is equipped with an internal drum light, it’s malfunctioning or not turning on.
E124 or F124: Color protection error
For machines with a color protection feature, there’s a malfunction.
E125 or F125: Anti-leak system error
The system responsible for detecting and preventing leaks is not working.
E126 or F126: Drum cleaning function fault
If the machine has a drum cleaning function, it’s encountering issues.
E127 or F127: Water hardness calibration error
The calibration for the machine’s water hardness detection is off.
E128 or F128: Eco-mode function error
The eco-mode, meant for energy-saving operation, is malfunctioning.
E129 or F129: Anti-bacterial cycle error
For machines with an anti-bacterial wash cycle, there’s an issue with the function.
E130 or F130: Internal diagnostic error
The machine’s system for running diagnostics on itself is encountering errors.
E131 or F131: Emergency drain error
The machine’s feature for emergency draining is not working correctly.
E132 or F132: Memory recovery fault
The machine is facing issues trying to recover data from its memory.
E133 or F133: Motor control fault
There’s a malfunction in the machine’s system that controls motor functions.
E134 or F134: Cycle customization error
The machine is encountering issues when users attempt to customize wash cycles.
E135 or F135: Noise level detection fault
For machines with noise detection, the system is not working correctly.
E136 or F136: Air flow error
For combo washer-dryers, there’s an error in the airflow system meant for drying.
E137 or F137: Water intake duration error
The duration for water intake is either too short or too long.
E138 or F138: Drum stabilization fault
The system responsible for stabilizing the drum during operation is malfunctioning.
E139 or F139: Heat exchange system error
If equipped, the heat exchange system for energy efficiency is encountering issues.
E140 or F140: Safety relay fault
The machine’s safety relay, ensuring certain operations only occur under safe conditions, is malfunctioning.
E141 or F141: Delay start function error
The delay start feature, which allows users to delay the start of a cycle, is malfunctioning.
E142 or F142: Cycle pause fault
The machine’s ability to pause mid-cycle and resume is encountering issues.
E143 or F143: Internal moisture detection error
The system responsible for detecting moisture levels inside the drum is not working correctly.
E144 or F144: Drum light circuit fault
If the machine is equipped with a drum light, its electrical circuit is malfunctioning.
E145 or F145: Child lock error
The child lock feature, which prevents unwanted changes or starts, is malfunctioning.
E146 or F146: Rinse aid sensor fault
For machines with a rinse aid dispenser, the sensor indicating levels is malfunctioning.
E147 or F147: Spin speed detection error
The machine’s system to detect and regulate drum spin speed is encountering issues.
E148 or F148: Door seal detection fault
The system ensuring the door seal is properly in place is not functioning.
E149 or F149: Pressure switch calibration error
The calibration of the pressure switch, which measures water level, is off.
E150 or F150: Remote start function error
If the machine can be started remotely via an app or other device, this function is malfunctioning.
E151 or F151: Water re-use function fault
For machines that can re-use rinse water, this feature is encountering issues.
E152 or F152: Bleach dispenser error
For machines with a bleach dispenser, there’s a malfunction or blockage.
E153 or F153: Drum balance error
The system ensuring the drum remains balanced during spinning is not working.
E154 or F154: Internal software checksum error
The machine’s internal software has an inconsistency or corruption issue.
E155 or F155: Detergent auto-dosing error
For machines that auto-dose detergent, this feature is malfunctioning.
E156 or F156: WiFi module fault
If the machine connects to WiFi for updates or remote control, the module is faulty.
E157 or F157: Drum lubrication system fault
If equipped, the system lubricating the drum’s movements is malfunctioning.
E158 or F158: Door handle detection fault
The machine’s ability to detect if the door handle is engaged or not is malfunctioning.
E159 or F159: Inverter control error
The inverter, controlling motor speed variability, is experiencing issues.
E160 or F160: Machine overuse detection
The machine has detected excessive use over a short period, leading to potential overheating.
E161 or F161: Water conductivity sensor fault
The sensor that measures water conductivity, which may affect detergent efficiency, is malfunctioning.
E162 or F162: Steam vent error
For machines with steam functionality, the vent responsible for releasing steam is not functioning correctly.
E163 or F163: Rapid wash cycle error
The machine’s rapid or quick wash cycle is encountering problems.
E164 or F164: Pre-soak function fault
The pre-soak function, meant for heavily soiled clothes, is malfunctioning.
E165 or F165: Anti-flood device fault
The device responsible for preventing flooding is not working as intended.
E166 or F166: Motor overheat detection
The washing machine has detected excessive heat from the motor, indicating potential overheating.
E167 or F167: Internal data log error
The system responsible for logging internal operations for diagnostics is malfunctioning.
E168 or F168: Cold wash cycle error
The cold wash cycle, which washes without heating the water, is encountering issues.
E169 or F169: Control module cooling fault
The cooling system for the control module is not functioning properly.
E170 or F170: Emergency stop error
The machine’s emergency stop function is not working as intended.
E171 or F171: Water temperature consistency fault
The machine is unable to maintain a consistent water temperature during a cycle.
E172 or F172: Energy-saving mode error
The energy-saving mode, meant for reduced energy consumption, is malfunctioning.
E173 or F173: Drum position detection fault
The system that detects the position of the drum is malfunctioning.
E174 or F174: Over-sudsing detection error
The machine’s ability to detect and handle excessive soap suds is compromised.
E175 or F175: Lint filter detection fault
For machines equipped with a lint filter, the detection system is malfunctioning.
E176 or F176: Drying phase error
For combo washer-dryers, there’s an issue with the drying phase of the cycle.
E177 or F177: Wool cycle error
The specific cycle designed for washing wool garments is encountering problems.
E178 or F178: Spin limit fault
The machine is spinning at speeds beyond its set limits.
E179 or F179: Pre-wash phase error
The machine is having issues during the pre-wash phase of a cycle.
E180 or F180: Maintenance reminder error
The system reminding users of scheduled maintenance or checks is malfunctioning.
E181 or F181: Intensive rinse error
The intensive rinse cycle, which provides extra rinsing, is encountering issues.
E182 or F182: Drum door alignment fault
The door to the drum is not aligning correctly, which may prevent sealing.
E183 or F183: Oxidation sensor fault
For machines with sensors to detect oxidants or use them in cleaning, there is a malfunction.
E184 or F184: Allergy cycle error
The specific cycle designed for washing allergenic materials is having problems.
E185 or F185: Backup power supply fault
If the machine has a backup power source, it’s malfunctioning.
E186 or F186: Dynamic load adjustment error
The system that adjusts machine settings based on the load weight is malfunctioning.
E187 or F187: Sound insulation fault
If the machine has additional sound insulation features, they are malfunctioning.
E188 or F188: Refresh cycle error
The cycle meant to refresh lightly worn clothes is encountering problems.
E189 or F189: Water ionization fault
For machines that utilize water ionization for cleaning, there’s an issue.
E190 or F190: Ambient light sensor fault
If the machine adjusts its display based on ambient light, the sensor is malfunctioning.
E191 or F191: Eco drum clean error
The cycle meant for eco-friendly drum cleaning is having issues.
E192 or F192: Cloud connectivity error
If the machine connects to cloud services for updates or diagnostics, there’s a connection error.
E193 or F193: Fabric recognition fault
If the machine adjusts settings based on fabric type detection, this feature is malfunctioning.
E194 or F194: Anti-tangle feature error
The system that prevents clothes from tangling during washing is having issues.
E195 or F195: Internal camera fault
For high-tech machines equipped with internal cameras (e.g., for stain detection), there’s a malfunction.
E196 or F196: Voice control error
If the machine can be controlled via voice commands, this function is not working.
E197 or F197: Descale reminder fault
The system reminding users to descale or remove mineral buildup is malfunctioning.
E198 or F198: Eco feedback error
For machines providing feedback on eco-friendly usage, this feature is malfunctioning.
E199 or F199: Drum light intensity fault
If the drum light’s brightness can be adjusted, there’s an issue with this feature.
E200 or F200: End-of-life detection
The machine’s diagnostics have detected components reaching their end of life.
E201 or F201: Remote diagnostic fault
If the machine has the ability to run remote diagnostics with service centers, this feature is malfunctioning.
E202 or F202: Detergent residue detection error
The machine’s sensor to detect detergent residue post-wash is not working correctly.
E203 or F203: Anti-crease feature fault
The system intended to minimize creases on clothes post-wash is having issues.
E204 or F204: Humidity sensor error
For washer-dryers, the humidity sensor to detect dryness level is malfunctioning.
E205 or F205: Touchscreen calibration fault
If the machine has a touchscreen interface, its calibration is off.
E206 or F206: Power surge detection error
The machine’s feature to detect and protect against power surges is not working.
E207 or F207: Internal communication fault
There’s a communication issue between the machine’s internal components or modules.
E208 or F208: Anti-vibration system error
The system to reduce vibration during operation is malfunctioning.
E209 or F209: Mineral detection fault
If the machine adjusts its washing based on water mineral content, the sensor is faulty.
E210 or F210: Carbon footprint estimator error
For machines with features estimating energy consumption impact, there’s an issue.
E211 or F211: Self-cleaning detergent drawer fault
The feature that auto-cleans the detergent drawer is malfunctioning.
E212 or F212: Odor removal cycle error
The specific cycle meant for removing odors is having issues.
E213 or F213: Internal battery fault
If the machine has an internal battery for settings memory, it’s malfunctioning.
E214 or F214: Water reuse filter error
For machines that filter and reuse water, the filter system is compromised.
E215 or F215: Fabric softener dispenser fault
The dispenser responsible for releasing fabric softener is malfunctioning.
E216 or F216: 3D sensor wash error
If equipped with 3D sensors to optimize wash cycles, there’s a malfunction.
E217 or F217: Biodegradable detergent detection fault
For machines that adjust cycles for biodegradable detergents, the sensor is malfunctioning.
E218 or F218: Load imbalanced retry limit reached
The machine tried to balance the load multiple times but failed consistently.
E219 or F219: Ambient temperature sensor fault
The sensor measuring room temperature for optimal operation is malfunctioning.
E220 or F220: Display language error
The machine encounters an error when trying to display in the selected language.
E221 or F221: Recirculation pump fault
The pump meant for water recirculation during wash is not working correctly.