Your washing machine may not fill with water after running a programme. The drum stops rotating and an error message may appear on your display board to alert you to this failure.
Observing the path of the water allows you to understand where this breakdown can come from and solve your problem of a washing machine that does not fill. It is therefore necessary to check several elements of the washing machine:
- faucet and siphon
- the solenoid valve filter and the solenoid valve
- the hoses
- the product box
- the pressure switch.
Discovering that your washing machine is not filling with water can be frustrating and can disrupt your laundry routine. A washing machine relies on a steady supply of water to perform its cleaning cycle effectively. There are several potential reasons why a washing machine may fail to fill with water, ranging from simple issues to more complex problems with water supply or internal components. Understanding these causes can help you troubleshoot the problem and find a solution. In this article, we will explore the common reasons why a washing machine is not filling with water and provide possible solutions to address the issue.
1. Water Supply Issues
The first step in troubleshooting a washing machine that is not filling with water is to check the water supply. Ensure that the water supply valves are fully open and that there is no issue with the water supply in your area. Check if other faucets or appliances in your home have water flow. If there is no water supply, contact your water provider or plumber to resolve the issue.
2. Clogged Inlet Valve Filters
Clogged inlet valve filters can prevent water from entering the washing machine. These filters are located at the water inlet connections on the back of the machine. Over time, sediment, debris, or mineral deposits can accumulate in the filters, restricting water flow. Inspect and clean the inlet valve filters to remove any blockages and ensure proper water flow.
3. Faulty Water Inlet Valve
The water inlet valve controls the flow of water into the washing machine. If the valve is faulty or damaged, it may not open properly to allow water into the machine. Test the water inlet valve for continuity using a multimeter. If there is no continuity, it indicates a faulty valve that needs to be replaced. Consult the manufacturer’s instructions or contact a professional technician to replace the faulty water inlet valve.
4. Clogged Water Inlet Hose
Clogs in the water inlet hose can also prevent water from entering the washing machine. Inspect the water inlet hose for any kinks, twists, or blockages. Straighten any kinks or twists and remove any obstructions to ensure a free flow of water.
5. Faulty Pressure Switch
The pressure switch, also known as the water level switch, controls the amount of water that enters the washing machine. If the pressure switch is faulty, it may not detect the water level correctly and prevent the machine from filling with water. Test the pressure switch for continuity and proper operation. If it is faulty, it needs to be replaced by a professional technician.
TEST THE WASHING MACHINE PRESSURE SWITCH
The pressure switch controls the water level in the washing machine using an air pressure system. If it is defective, an error code will be displayed and the solenoid valve will not be powered. This part is located on the top of the washing machine for front loading and on the front panel for a “top” washing machine.
Check if you have a ball pressure switch, because the analog ones are not controllable: they are provided with an electronic board.
- Disconnect the pressure switch from the hose.
- Set your multimeter to the continuity position and put the two test probes on the terminals of the pressure switch. If the multimeter beeps, the pressure switch is working.
- If your pressure switch is not analog, you can also check it by blowing inside, while holding the multimeter tips on the terminals: this will activate the membranes, make contact and cause a change of state. If you hear a beep, or if you notice a change in status on the multimeter while you blow into the pressure switch, then it is not the cause of the fault.
Troubleshooting Steps
Here are some troubleshooting steps you can take when your washing machine is not filling with water:
- Verify that the water supply valves are fully open and that there is no issue with the water supply in your area.
- Inspect and clean the inlet valve filters to remove any blockages.
- Test the water inlet valve for continuity and replace it if faulty.
- Check the water inlet hose for kinks, twists, or blockages and clear any obstructions.
- Test the pressure switch for continuity and proper operation, and replace it if necessary.
By following these steps, you can often identify and address the issue of a washing machine that is not filling with water. Regular maintenance, attention to water supply, and proper cleaning of filters and hoses will help prevent future occurrences.
In conclusion, a washing machine that fails to fill with water can be caused by various factors, including water supply issues, clogged inlet valve filters, faulty water inlet valves, clogged water inlet hoses, and faulty pressure switches. By understanding these common causes and following the troubleshooting steps mentioned above, you can often identify and address the issue effectively. If the problem persists or if you are unsure about any repairs, it is advisable to consult a professional technician to diagnose and repair the specific problem with your washing machine.
“If you’re in Toronto or the Greater Toronto Area and need your washing machine repair home service urgently, contact Shymon Appliance Repair, we know how to fix it!”
