The extractor hood turns out to be an essential appliance for the kitchen. It allows the suction of grease and smoke from cooked dishes and thus ventilates the kitchen. For extractor hoods, two types of evacuation exist: either evacuation by extraction or by recycling. Most hoods have both modes, recirculation and exhaust, but some only have one of them.
It is important to know how to maintain the filters, because they are the ones that will capture odors and grease. The ventilation of the kitchen is thus of better quality. However, it is not uncommon to see failures on this type of device. The lights may not work while the engine is running.
On the hoods there can be three different lighting modes:
- the bulb: check its general condition and test the socket
- neon: cleaning is sufficient or it must be replaced.
- the LED lamp: it will be necessary to check the power supply on the transformer and the electronic card
The extractor hood, also known as a range hood, plays an essential role in a kitchen. It not only removes smoke, grease, and unpleasant odors but also provides illumination, enhancing visibility while cooking. However, you may sometimes find that the light on your extractor hood is not working. This article will explore several reasons why this might be happening and provide potential solutions.
Burnt-out Bulb
The most common reason for the hood light not working is simply a burnt-out bulb. Just like any light bulb, the one in your hood has a finite lifespan and will eventually need to be replaced.
Solution: Try replacing the bulb. Ensure the power is turned off and the old bulb is cool before you attempt to remove it. Always replace it with a bulb of the same type and wattage to avoid any potential issues.
Faulty Light Switch
Just like the fan switch, the light switch on your extractor hood can wear out over time due to regular use, leading to the light not functioning.
Solution: If you are comfortable doing so, you can use a multimeter to test the switch for continuity. If the switch is faulty, it will need to be replaced. Depending on your comfort level with electrical repairs, you may want to call a professional.
Loose or Damaged Wire Connections
Loose or damaged wiring can also cause the light on your extractor hood not to work. Over time, the wire connections to the light fixture may become loose, or the wiring may be damaged.
Solution: Check the wiring for any loose connections or visible damage. If you find a loose connection, make sure the power is off before you tighten it. If you notice damaged wires, it’s best to call a professional for repair.
Defective Light Socket
A faulty socket may be another reason why the light isn’t working. The socket provides the electrical connection to the bulb, and if it’s defective, it will prevent the bulb from lighting up.
Solution: Testing a socket generally involves using a multimeter and should be done by someone comfortable working with electricity. If the socket is determined to be the issue, replacing it should solve the problem. However, unless you’re experienced in such repairs, this is typically a job for a professional.
When to Call a Professional
While some of these potential issues can be addressed by an experienced DIYer, working with electrical appliances can be dangerous if not handled correctly. If you’re unsure about the cause of the problem, or uncomfortable performing any of these potential solutions, it’s best to call a professional. They can diagnose and fix the problem safely and effectively, getting your hood light working again.
In conclusion, while it can be frustrating when the light on your extractor hood stops working, the cause is often relatively straightforward to identify. Whether it’s a simple bulb change or a more complex electrical issue, understanding these potential problems is the first step in getting your kitchen lighting back in working order.
